I Need R33 Gtst Skyline Wheel Alignment Specs

[tai_180sx]

as the topic sais i need to find out what the wheel alignment specs are for an r33.

i need to know everything that can be set up on the machine. i.e camber/caster/toe in/ toe out.

all the standard specs of this car.

[Sydneykid]

Unless you have camber and caster adjustment fitted aftermarket you can't adjust them on the front. There is a limited amount of camber adjustment standard on the rear (round 0.25 degree). Toe front and rear can be adjusted as usual.

The standard camber and toe settings are prety much zero all round, except the rear which has a small amount of toe in. Caster is around 5 degrees positive.

Cheers

[tai_180sx]

a little bit means like 1 degree? do have the exact std specs?

[Sydneykid]

a little bit means like 1 degree? do have the exact std specs?

1mm each side toe in on the rear.

cheers

PS; The suspension is full of rubber bushes everywhere, don't expect precision accuracy. ie; don't panic if it is 1.5 mm, even 2 mm is OK. It's all about consistency (ie; 1mm each side toe in, not 1 mm toe in one side and 3 mm toe out the other).