Jump to content
SAU Community

Recommended Posts

Others have posted in here that it can be done. when i rung nissan there is only one type of gtr valve spring yet there are 3 different tyres of rb25 valve springs when i rung the local cam/head specialist.

Id consider using an rb26 head on that combination as then you will be able to use the standard wiring. THis + the superior flow characteristics make for a good choice

:P hi guys,

I've just bought another r33gtr to turn into a drag/monaro & xr6t basher.I've taken out the original engine and am currently building an rb25/30 hybrid.I was wondering can I swap valve springs from the rb26 with rb25.

>_<

Another GTR hey... lol

Why would you run the inferior rb25 head when you have an rb26?

Rb26 springs in to RB25 are fine

RB25 springs in to rb26 is definitely not fine.

The RB25 springs are shorter and are not suitable for the rb26.

:O Thanks for the replies guys. :D

I will do the 26 springs.

Why don't I use the 26 head ?

I'm stripping the complete motor out to keep it totally original.My other is a stock std 95 Tommy Kaira.

So in the future If I decide to sell them, they should return me more with a worked (non original) rb26 and 25/30 hybrid engines installed. As well as the original/unmodified/less than 15000km engines for them.

To me this makes sence.

Why own one of the best std sports cars in the world and flog the absolute guts out of the engine/gearbox until it goes bang. Then wish that you had kept it standard and drove it for the next 20 odd years.

When you can keep it for ever, the way it left the factory, if you put a hybrid in.

:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
    • Generally yes but for some reason I've been ruthless this time around!  I might even need to do another tip run after the way I've finally been able to hit the delete button on shit I've stepped over, stepped around and tripped over for the past 10 years!
×
×
  • Create New...