Jump to content
SAU Community

Recommended Posts

hey guys, just thought ild post up about my rebuild.. 94 r33 rb25

my old engine was running 270-280hp atw and although it would still get down and boogie, i decided i wanted to get mid-low 300hp mark but then i got a little carried away. i wanted to keep the rb25 in there too once the engine was out and machined ect ect then we threw in

aries87m forged pistons n rings

eagle forged rods

arp head and main studs

tomei poncams

tomei 1.5mm head gasket

acl racing bearings (main and big end)

full nissan gasket kit

os giken twin plate clutch

turbo side

custom hi mount s/s manifold

garret gt35r turbo with braided lines

turbosmart ultragate wastegate

new s/s intercooler piping

a/m 80mm throttle body and cable

greddy plenum

hks ssq bov

denso fuel pump

nismo 720cc injectors

new timing belt

wolf3d v4

k & n pod filter

themostat

i think thats about it, all the work was done by steve and the guys at top racing, who did an awsome job and were very helpfull (as i dont know to much about engines) and if there was a problem i was called straight away.... i only got it back monday and only lastnight finished my set km's to run it in, while running it in the rev limiter was set at 4000rpm, so shes goin back in there hopefully this week for the final tune, and i'll let ya know what numbers we get out of her,... a new diff and gearbox is on the save list next to we can go a bit harder maybe, but im not a tuner so i dont know ahhaha..

john also painted the engine and timing covers for me in an awsome white and purple pearl, some pics belove

cheers guys

post-10720-1143340032.jpg

post-10720-1143340259.jpg

Link to comment
https://www.sau.com.au/forums/topic/111110-my-rebuild/
Share on other sites

  • Replies 112
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

um i dont really know what hp we will get, im not a tuner, untill i get a new diff and gearbox i dont want shit to go bang... im hopin 400+ on a safe tune,who knows..

dint take to long month and a half, but we waited on parts more then anything, and the chinese new years aparently hold things up this time of year...

Link to comment
https://www.sau.com.au/forums/topic/111110-my-rebuild/#findComment-2052038
Share on other sites

aries87m forged pistons n rings

eagle forged rods

arp head and main studs

tomei poncams

tomei 1.5mm head gasket

acl racing bearings (main and big end)

full nissan gasket kit

os giken twin plate clutch

turbo side

custom hi mount s/s manifold

garret gt35r turbo with braided lines

turbosmart ultragate wastegate

new s/s intercooler piping

a/m 80mm throttle body and cable

greddy plenum

hks ssq bov

denso fuel pump

nismo 720cc injectors

new timing belt

pistons can be had for around 1400

rods a little more

cams are like 1k a set , gears around 400 bucks

see where im heading... add the sum of the parts together, then add labour, you might get a price without having to ask

Link to comment
https://www.sau.com.au/forums/topic/111110-my-rebuild/#findComment-2057716
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...