Jump to content
SAU Community

Recommended Posts

Hi all,,

I am trying to get my wipers off my 97 gtst ... i undid the nut under the little black rubber cap and have been trying to pull the biatch off for like 15 mins now...

I cant see it held on with any other nut or bolt.. correct me if i am wrong..

Reason I wanna remove them is to give them a fresh paint (as they are badly faded)..

Any help thanks...

-JD

Link to comment
https://www.sau.com.au/forums/topic/111114-how-to-remove-wipers/
Share on other sites

Hi all,,

I am trying to get my wipers off my 97 gtst ... i undid the nut under the little black rubber cap and have been trying to pull the biatch off for like 15 mins now...

I cant see it held on with any other nut or bolt.. correct me if i am wrong..

Reason I wanna remove them is to give them a fresh paint (as they are badly faded)..

Any help thanks...

-JD

yep just one nut, you will probably have to lever them off with a a screwdriver as they have probably never be off from the factory.

spray the shaft with some WD40 and let it soak in a little, the do tend to bind to the shaft

yeah man tell me about it being binded to the shaft!! i used wd40 , oil and everything else that makes shit slippery and it still wont budge!!

grrr..

Skyline - 1 ... JD - 0 :D

You just got to pull it hard :thumbsup: , i thought i was going to break my rear windscreen but it came off successfully.

lol pshht thats what i thought when i got mine, no rear wiper, i wanted one as well, when its raining hard you cant see shit through the rear windscreen,

the rear wiper is an option for series II's for some stupid reason, while series 1's had them standard,

well in a good way its less weight for the car

Edited by R33TOM

you suckers! stop pulling them so hard!!!

to take them off:

- undo the nut that holds them

- press down on the join in the wiper closest to the nut

.. you will find that the spring gives way and you can hold the wiper horizontal

- take the wiper off with ease :(

cheers,

Warren

you suckers! stop pulling them so hard!!!

- press down on the join in the wiper closest to the nut

cheers,

Warren

Hrmm ,, so push down on the wiper right next to where the nut was removed .. :S .. so take nut off push wiper down then springs back up...

sorta confused :) ..

Hrmm ,, so push down on the wiper right next to where the nut was removed .. :S .. so take nut off push wiper down then springs back up...

sorta confused :) ..

I think you should continue to Pull and Yank instead of playing with your nuts.

you suckers! stop pulling them so hard!!!

to take them off:

- undo the nut that holds them

- press down on the join in the wiper closest to the nut

.. you will find that the spring gives way and you can hold the wiper horizontal

and HOLD the wiper horizontal as you take it off...

- take the wiper off with ease :)

cheers,

Warren

when i did my wipers i used touch up paint in the same colour as my car

I humg them in the garage from a piece of string and laid down newspaper for any overspray.

then i gave them about 5 or 6 coats of paint... really ut that shit on there. its now been about a year and no sign of fading or cracking :D

JD_33 - trust me you will be kicking yourself when you see how easy they come off.. i only say this as i was in the same situation, swearing etc. and my dad walked outside and took them off in one second!

removing the rear wiper is easy

1/ lift up cover and undo bolt holding arm in place

2/ Put big socket on nut (23mm from memory) and use breaker bar

3/ Replace rear windscreen

Here is a pic to help explain

IMG_7390_small.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...