Jump to content
SAU Community

Recommended Posts

Hi guys as the topic states i'm coming down there in 10 days and i'm just wondering were are the happining places and what to expect when i get down there i am flying over so i wont have the line with me but i'm staying in the launceston country club so some good places to go around there would be great thanks !

Link to comment
https://www.sau.com.au/forums/topic/111194-coming-to-tas-in-10-days/
Share on other sites

you can have a few drinks at the caz i guess where your staying..but best to get a taxi and tell the driver on a saturday night to take you to "Lonnies" :(

we have a few meets on through friday and saturday nights, Friday Nights till 12 at Inveresk Tramsheds, and Saturday you normally find a few imports in town or out and about.

Welcome to Tas dude!

you can have a few drinks at the caz i guess where your staying..but best to get a taxi and tell the driver on a saturday night to take you to "Lonnies" :(

we have a few meets on through friday and saturday nights, Friday Nights till 12 at Inveresk Tramsheds, and Saturday you normally find a few imports in town or out and about.

Welcome to Tas dude!

Thanks for ya help mate well yeah it would be good to see a few lines around tas while i'm there as i dont see enuff in melbs haha I can't wait to come down i think i will have a good time by the sounds of things

meh, Launceston is a fairly boring place. Few lines round the place but nothing to do. I'd suggest hiring a car and driving down the east coast if anything. But yeh, check out lonnies if ur in to clubs, it's the only decent one there just don't expect any current music.

haha I should be minister for tourism....

Hi guys as the topic states i'm coming down there in 10 days and i'm just wondering were are the happining places and what to expect when i get down there i am flying over so i wont have the line with me but i'm staying in the launceston country club so some good places to go around there would be great thanks !

When exactly will you be down MR R33???

There is a little special something happening next weekend at Symmons Plains raceway if you will be here and interested in drift??? :D

Cheers GMB

I am arriving there on the 7th of april its a trip away with the boys so we will be intrested in checking out the night life so hopefully there will be some i'm in to pubs clubs anything long as there aint much trouble there and theres lots of girls for the guys haha!

So GMB what is this drifting on and how far way is it from were i'm staying ?

I am arriving there on the 7th of april its a trip away with the boys so we will be intrested in checking out the night life so hopefully there will be some i'm in to pubs clubs anything long as there aint much trouble there and theres lots of girls for the guys haha!

So GMB what is this drifting on and how far way is it from were i'm staying ?

There will be drift and stunt demo's at Symmons Plains raceway on April 8th and 9th mate.

Michael Truscott, Drift Cat and Hopefully Dr Drift will be tearing it up on the track with a couple of the up coming locals over the 2 days.

Im sure you will find plenty to do in Launie!!!

  • 2 weeks later...

Hey guys well i have just came back from tassie i had a blast !! we stayed at the country club villas which was a good place i only seen on white r33 on saturday night around 12 out side the royal on george i think it was but yeah i checked out a few places when to the irish pub on sunday went to lonnies on friday and saturday night and went to the george on saturday night too i drank a bucket load and had a great time everyone seems to be so friendly in tassie well i hope to come back soon !

But i couldn't find this shell everyone was talking about haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.efisolutions.com.au/coolant-temperature-sensor-bosch-180sx-s14-s15-r33?gad_source=1&gclid=CjwKCAjwzMi_BhACEiwAX4YZUHsCQhbiDT_NC3q5wD9jrzH6Dts9eGSr19NXSDw7x9WVm1sH7G3S4hoCwaUQAvD_BwE this is the one i replaced today
    • I have replaced the larger coolant temp sensor, i do see a smaller one next to it (looks to be just 1 pin) but i assume that is just for the dash? or should i replace that aswell?
    • Check coolant temp sensor ~ symptoms fit the hard hot start/cold start OK scenario --- if sensor goes open circuit, ECU thinks engine is cold and enriches mixture ....works when engine cold, but floods them with rich mixture when hot (Hyundi MAP engines are a bit infamous for this)...
    • OK, starter changed for a spare without much trouble. Neil had kindly left space to get to the top starter motor bolt from above with a long spanner which makes the whole deal much easier, and everything else was neat and easy to get at from underneath. Once the starter was changed everything was good, unplugged the CAS and turned the motor on the starter to make sure everything was free and happy. Onto properly priming the oil and first start. I'd picked up one of these oil prime kit from Boost doc a while back and this was my first time using it.  https://boostdoc.com.au/products/engine-oil-prime-kit?_pos=1&_sid=28c628a65&_ss=r While I'd organised all the fittings to hook it up to my GTR (sump plug to -6 feed and -4 T to tap it in and retain the oil pressure gauge, neither suited on this car as the oil pressure needs to T into 1/8 NPT not -4 and the Aeropro sump has some massive drainplug not that factory whatever it is. So, waiting for a couple of fittings, then I'll prime it and do first start, hopefully next weekend. Other than that going well, there is very little stopping a final alignment, tune then shakedown day
    • Also to mention, i just tested the CAS, seems to be working fine, can hear the pulses inbetween 0 and 180 degrees, another mention aswell, when i let the car sit for about a hour today, i went to start it and it almost fired on first crank, then just completely struggled. Could it possibly be blocked injectors?, maybe allowing a little bit of fuel to seep past allowing it it almost start first crank?
×
×
  • Create New...