Jump to content
SAU Community

Which Turbo Is Best For Auto R33?


Recommended Posts

just wondering what turbo would be best on a auto r33 25t

i would like a turbo that kicks in the low rpm towards close to redline

because auto wont even let me rev it close to redline

it just changes gear on its own

any auto SAU's that has had experience with this problem?

i was more looking into a HKS 2530? kicks in at 35k rpm

Link to comment
Share on other sites

I have a 2535 on my Auto R33, its a great turbo, peaks around 6500 with

tons of midrange, only a few hundred RPM more lag than standard turbo, you can barely feel it

I have that same problem atm though, sometimes after a few runs, the auto gearbox just shifts earlier and earlier. I have no idea why. So I get a great first run but it just gets worse after.

Link to comment
Share on other sites

yea I have a transcooler and valvebody upgrade

didnt solve anything, during the install changed the fluid, and filter

problem still there, Im trying to install oil temp gauge to keep tabs on the auto box temperature, but having problems finding fittings for it

Link to comment
Share on other sites

I have a 2535 on my Auto R33, its a great turbo, peaks around 6500 with

tons of midrange, only a few hundred RPM more lag than standard turbo, you can barely feel it

I have that same problem atm though, sometimes after a few runs, the auto gearbox just shifts earlier and earlier. I have no idea why. So I get a great first run but it just gets worse after.

I cant imagine what your new RB30DET is going to be like with the 2535,tow a road train.

Link to comment
Share on other sites

Recommend a highflow, There are two types, GCG do one with a BB cartridge, retails for around $1650, The other is a new bush bearing cartridge, Retails for around $1350. You retain standard plumbing & ducting.

Have done this upgrade on a couple of customer cars and they retain similar boost threshhold but pull right through revrange. your auto issues probably warrant a full manual valve body. Do the turbo upgrade fist, and go from there.

just wondering what turbo would be best on a auto r33 25t

i would like a turbo that kicks in the low rpm towards close to redline

because auto wont even let me rev it close to redline

it just changes gear on its own

any auto SAU's that has had experience with this problem?

i was more looking into a HKS 2530? kicks in at 35k rpm

Link to comment
Share on other sites

i have a r33 turbo on my auto 32gtst. + SAFC

no problem pulling to redline.

the problem was it wasnt changing quick enough before redline and therefore just hit the limiter.

this problem will be solved very soon as my g/box is being rebuilt much much stronger

Link to comment
Share on other sites

Ive got a GCG turbo. Its not bad at all, really livens the car up.

Will map most of the lag out with a DFA and EBC tune + cams will basically make it about as laggy as stock on about 15psi. Will be sweet

Link to comment
Share on other sites

Want boost earlier? I'll swap turbos with you.

rb20det unit will be spooling up in no time, and since you never get anywhere near redline, it wont* run out of puff.

*wont = might not.

:)

Link to comment
Share on other sites

at what rev does the gcg hi flowed turbo's kick in?

is there any site to help me on this?

i was more thinking on hi flowing but last thing i want is a laggy turbo that goes off for a bit then my car changes gear... no benefit at all

Link to comment
Share on other sites

  • 4 weeks later...

aquariuz6 - you have posted a number of threads in the past month.

In each one you are asking something totally different, or very similar questions

http://www.skylinesaustralia.com/forums/in...opic=114538&hl=

http://www.skylinesaustralia.com/forums/in...opic=111757&hl=

http://www.skylinesaustralia.com/forums/in...opic=108123&hl=

http://www.skylinesaustralia.com/forums/in...opic=108131&hl=

You need to set a goal and stick to it

Then read the RB25 Dyno Sticky and see what works for you.

If you then compare the turbos yourself, and plug that against the goal that you end up deciding on.

Im not trying to be rude or anything, but we cant really help you, if you cant decide and then stick to it.

As RB Power said, you have an auto, if you get the right convertor you wont loose bottom end as much

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...