Jump to content
SAU Community

Pineapples

R33S2
 Share

Recommended Posts

R33S2 Grand Master

R33S2

Posted
Posted

I have them in my car and the improved handling is noticable, yet I meet other members and they haven't heard of them, its a bit hard trying to describe them because I really dont know what they do, although I know the difference of before/after.

BEFORE

When entering a corner I could feel the body move/angle over to the opposite of travel and then the shocks/springs dampen this effect.

AFTER

No body movement just springs/shocks doing their thing, still has body roll (until whiteliners are in)

So I assume that the pineapples fill or harden a soft (family car) spot in the setup, can somebody fill in the gaps for me? :wub:

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/
Share on other sites
dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted

Did you put the 4 in or the 8 in. Are yours poly or aluminum?

I have 8x 4-5mm thick aluminium ones in, and I want to pull 4 out to see what it does. I dont think the 8 are really helping, just contributing to in cabin noise from the diff.

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2054983
Share on other sites
shif_tea Grand Master

shif_tea

Posted
Posted

sell em here for $99 per set, Bee R brand

http://www.otomoto.com.au/beer.htm

from the website:

Adding these bushes to the rear suspension cradle in any RWD Nissan (and GT-Rs) from 1988 to 2002 reduces cradle movement dramatically to give a more consistent, predictable feel to the rear end, which is especially valuable for drifting. By altering the static angle of the cradle, pineapple bushes also promote rear suspension squat for greater rear grip.

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2055222
Share on other sites
MerlinTheHapyPig Mentor

MerlinTheHapyPig

Posted
Posted

I wonder if someone can answer a related question for me on this.

There are 3 setups you can use pineapples for, Drift, All round, Drag

I think sydneykid posted a "where to install them" for each setup, but my question is...

The pineapples i bought came with 4 small rings and 4 large rings, if i'm setting it up for drift, do i use 2 small ones and 2 big ones and just not use the other 4? or do I use all 8??

And to anyone who uses them for "drift", how much does it effect oversteer? I'm wondering if i should just use the 'all round' setup for them, becuase i'm not having any major understeer problems, and i dont want to make the car too spin-happy!

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2057706
Share on other sites
Bl4cK32 Grand Master

Bl4cK32

Posted
Posted
I wonder if someone can answer a related question for me on this.

There are 3 setups you can use pineapples for, Drift, All round, Drag

I think sydneykid posted a "where to install them" for each setup, but my question is...

The pineapples i bought came with 4 small rings and 4 large rings, if i'm setting it up for drift, do i use 2 small ones and 2 big ones and just not use the other 4? or do I use all 8??

And to anyone who uses them for "drift", how much does it effect oversteer? I'm wondering if i should just use the 'all round' setup for them, becuase i'm not having any major understeer problems, and i dont want to make the car too spin-happy!

Apparently the setup for drift makes it stupidly slippery. Best to set it up for allround if you just want the subframe firm, or put them in with the Noltec subframe bush kit to set the subframe for traction.

4 small ones for traction according to whiteline.

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2058009
Share on other sites
R33S2 Grand Master

R33S2

Posted
  • Author
Posted

I dont remember what was put in mine but they are Purple and on the bottom of the subframe so its all round performance, nolathane bushes went in as well.

So I can say to the peoples that they reduce the cradle movement and give a more presice feel to the rear end.

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2058256
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted

Be carefull, the article in HPI/ZOOM is missleading.

The Otomoto kit only has 4 bushes. 2 large (not split) and 2 small (split). When you use the 2 small bushes below the subframe you have to tie wire them otherwise they WILL fall out.

As you can see from the instructions (copy following) the Whiteline kit has 6 bushes, 2 large (not split), 2 small (split) and 2 small (not split). The 2 large bushes do not need to be split as they are mounted below the subframe. The 2 small split bushes are for fitting above the subframe without removing the subframe from the chassis. The 2 small non split bushes do not need to be split as they are mounted below the subframe. Since they are not split, they WILL NOT fall out, ie; they do not need lock wiring

Whitleine_rear_subframe_instructions.jpg

For $5 extra I would buy the Whiteline kit, get the extra 2 bushes and avoid the need for lock wiring, which is not a permanent solution.

:P cheers :O

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2058355
Share on other sites
Thunderbolt Rising Star

Thunderbolt

Posted
Posted
Did you put the 4 in or the 8 in. Are yours poly or aluminum?

I have 8x 4-5mm thick aluminium ones in, and I want to pull 4 out to see what it does. I dont think the 8 are really helping, just contributing to in cabin noise from the diff.

I have 8 aluminium ones in (c type), and to tell you the truth - the noise does not bother me at all. You certainly notice it's there, but what's a little bit of noise on a sports car. If you don't like noise then you should get the polyurethane ones.

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2058461
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted
no offence Syd kid i have the otomotto kit and i have 2 large split and 2 small non split

Interesting, the sample kit I have has 2 large split and 2 small split

If the 2 small are not split, how did you get them above the subframe?

Remove the subframe?

Or cut the bushes?

:P cheers D

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2058460
Share on other sites
MerlinTheHapyPig Mentor

MerlinTheHapyPig

Posted
Posted

ok, thanks for the replies, but i'm even confused now...

the kit I have (alloy pineapples) has 4 large split, and 4 small not-split... (the smaller ones are the thicker ones yeah?)

so go figure!!!

I might give them a try in "drift" mode and if it's too spin happy i'll change them to "all round"

also, which way around do they go?

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2058466
Share on other sites
MerlinTheHapyPig Mentor

MerlinTheHapyPig

Posted
Posted (edited)

http://www.driftshop.com.au/suspension_files/subframe.JPG

^ these are the ones I have....

is install different from the whiteline ones? I need to know the correct layout for "Drift" and "all round"........

Edited by MerlinTheHapyPig
Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2058476
Share on other sites
Bl4cK32 Grand Master

Bl4cK32

Posted
Posted

The whiteline ones are urethane, and are there to change alignment of the subframe.

The alloy ones u got there are designed to crush up the std bushes to stop flex in the subframe, without changing alignment of the subframe.

In your case i think the c ones go in the top, and the others go underneath, so its meant to fit without removing the subframe.

Link to comment
https://www.sau.com.au/forums/topic/111428-pineapples/#findComment-2058495
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...