Jump to content
SAU Community

Recommended Posts

one of my best mates just recently had to fix the gearbox in his series 1 R33 gts-t. I rang around everywhere looking for a secondhand box to replace his stuffed one.

why are people asking stupid prices for secondhand box's?? I mean really $1500 is the average price of a secondhand box, to which no-one can actually asure you of its condition 100%.

so after many phone calls, a phone call was made that put him onto competition gearbox's (i think that was the name) in Melbourne, who rebulit his gearbox for only $1400.

This gearbox that was rebuilt, couldnt even select first or second gear. Both those gears were completely replaced, hubs a all, aswell as 4th gear hub too. "one of the worst 33 box's he's seen" he was told.

So if a gearbox in such poor condition can be rebuilt at a cheper price than a secondhand item, surely this shows people are putting too much value on a 33 box (series 1 or 2...there the same). the average rebuild for a crunching gear or something would be even less dollars i'd imagine.

so anyone looking round at a secondhand box as the cheaper option to fixing your current one, definatly look into rebuilding, as it will probably be cheaper, an you can be sure of its actual condition afterwards.

all of a sudden, just because theres more r33's around, the price of there parts are all jacked up...dont seem fair...but thats life i guess, ultimatly you choose wheather you pay the high prices or not.

(note: we replaced the gearbox with the car up on jack stands in a garage, although it can be done....looking back I would have rathered payed $100-$150 to have someone else do it....lol)

cheers

Link to comment
https://www.sau.com.au/forums/topic/111560-why-are-people-asking-so-much/
Share on other sites

yeah its all about the damand for them.

almost every tom dick and harry with a S13 or r32 with decent amount of power and drives there car hard (or drifts it). is after an Rb25box

they are quite strong....and sinse many people are after them....they can jack the prices up and people will pay them

Sure if you have one rebuild it.

But that's not what is forcing the prices up, it's the guys that DON'T have one, who need one, that is causing the demand to exceed the supply and thats' what pushes the prices up.

:P cheers :rofl:

Sure if you have one rebuild it.

But that's not what is forcing the prices up, it's the guys that DON'T have one, who need one, that is causing the demand to exceed the supply and thats' what pushes the prices up.

:P cheers :rofl:

yeah I guess thats fair enough, I still think there a little overpriced. Seeing some people advertising them for more than $1500. I think round the $1000 is more around what there 'actually' worth, but as mentioned, only takes a few buyers to pay the higher prices.....an whats the prices go up an up.

hopefully, being theres not a great deal of drifting around in Vic for the next 12months or more, the prices of things like this will drop with less demand.

yeah I guess thats fair enough, I still think there a little overpriced. Seeing some people advertising them for more than $1500. I think round the $1000 is more around what there 'actually' worth, but as mentioned, only takes a few buyers to pay the higher prices.....an whats the prices go up an up.

If people are prepaired to pay that much, they arent overpriced.

As Sydneykid said, its all about supply and demand.

If i could be bothered i'd draw you a diagram as i just left my economics class... It doesnt matter what an item is 'worth', whatever someone is willing to pay is how much the item will cost.

Its those guys in Silvias :):down:

It's all their fault :O:O

Should be banned from buying Skyline stuff :P:O

Skyline parts belong ONLY on Skylines :yes::yes:

:D cheers :D

So what about me? BTW, I paid $1400 for a full box delivered to my mechanic with the yoke.

$1500 dollars to rebuild a rb25 gearbox? With new gears? I'd like to get that done to mine.

I am a mechanic, at a Nissan dealership (at the time) when I rebuilt my gearbox. Try over $1000 dollars just for all the bearings, at mates rates. You cant get gears for under $300, and syncros's start round $100. If I could have got my hands on a box for $1500 I wouldn't have been able to get the cash fast enough. The stress alone of checking and assembling a gearbox is worth that sort of money! (Especially a tight tolerance box like the rb25)

I dare say your mates box was repaired, not rebuilt. There is quite a big difference.

Another point, its quite possible that a factory assembled second-hand gearbox is going to be friendlier and better in the long run than a half assed repaired box. No one builds things as well as the crew at nissan!

I think it's very expensive.. almost worth getting a 3,200 brand new box.. and reco'ing and selling off your old one..

When reco'ing the box however - I doubt your gonna be replacing too many gears would you unless you've absolutely fcuked it..?

out of interest.. what exactly happened to it btw - what was he doing..

over $1000 worth of bits and pieces have already gone into my auto box

RE4RO1A.

in the end im looking at $3000 to rebuild my box.maybe more

not standard parts though.

IMO unless you buy a BRAND NEW box, your just buying someone elses problem.

i blame the vl's....they save so much on their crappy shells, they can afford to pay top dollar

for a rb25 g/box and engines.

Edited by RSTME

lets just say that a lot of the time the front wheels tend to do a lot less kms than the rear.....:)

an not all the gears were replaced, only first & second gears, a few syncros, an 3 gear hubs. no point replacing stuff that doesnt need to be.

not that it matters, but both myself and my freind are mechanics & priced up the rebuild kits through nissan at employee prices, an yeah, it was expensive.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back in January, I noticed my car felt noticeably weak. I had the injectors cleaned, which seemed to solve the problem -- until now. Recently, the car suddenly lost power again while driving. Suspecting the injectors, I brought it to the mechanic. He recommended replacing them entirely, saying the current ones were getting unreliable and fiddly to work with. I could not find a direct replacement for my current injectors. The closest match I found were 440cc injectors. This led me to look into the possibility of upgrading -- and of course, that would mean remapping the ECU. From my research I found: The OEM Part numbers are 16600-72L20 and 16600-72L21 Both the RB20DE and RB20DET use the same 270cc injectors. There are much better options out there over the old OEM injectors. Nistune could be a viable tuning option. While the RB20DE isn’t explicitly listed on their site, the ECU is essentially the same as the GTS-T version - just with a different map. The ECU code on mine is listed as supported. One concern is finding a tuner who works with Nistune. Aftermarket ECU like Haltech and Link, but this would be the most expensive choice (and possibly overkill for a mostly stock RB20DE) I admit that I am very new to the tuning scene and would appreciate any insight or recommendations regarding this.   These are some SAU links where I got some of my information from for reference: https://www.sau.com.au/forums/topic/380324-rb20de-injectors/ https://www.sau.com.au/forums/topic/477396-factory-270cc-injectors/  
    • The inspectors are not forensic by any means but if you forge your documents and/or badgings on vehicle parts and are found out, the consequences are just far bigger than if you just run illegal parts. And their job quite literally is to cross reference what parts you got installed and what your papers say you got. Something as silly as your suspension being 1mm too low will fail you. Nonetheless I asked if someone knew the damn pipe and I certainly did not ask for smartassery or underhanded comments, no idea why you need to be told this. Great way to waste both our time.
    • As useful as you explaining what forgery is... But then again, I wasn't aware your inspectors were also forensic experts and inspect nameplates on each component to confirm everything is original. They must inspect roughly 3 cars a year at that rate. You're right though, my comment doesn't help you in anyway, so I'll go talk to my wall now. Cheers. 
    • Say that to the guy that is going to fail your inspection or tow your car for illegal exhaust modifications. If you have anything else useful to say, please go tell your wall.
    • You must be fun at parties. 
×
×
  • Create New...