Jump to content
SAU Community

Recommended Posts

A must for any auto tranny driver - heat is what kills them.

This new buy is a continuation of the previous group buy

http://www.skylinesaustralia.com/forums/in...howtopic=105610

So, first to lay down the background, have a read of this thread about the ATF coolers.

http://www.skylinesaustralia.com/forums/in...showtopic=59399

Now, I can offer these coolers 678 DC coolers with 3/8inch fitings for $118 each plus postage and handling. Pickup available in Blackburn area in Melbourne, postage anywhere in Australia also available. Postage costs will vary. Handling fees will be fixed at $10 for each item (to cover bubble wrap, packing materials, going to the post office etc).

Worst case scenario, to the middle of nowhere, postage will be ~20$ (Thats like postcode 0830 in NT). Sydney/Adelaide should be around $10, Melbourne $7, Brisbane $13.

These RRP for $150, but you need to go pick em up etc, they are not delivered to your door (yes, i am THAT lazy )

This kit will fit R33's, R34's, Stagea and to the best of my knowledge probably R32's too. They are 3/8ths fittings with the largest universal coolers available.

So lets get some names

1. timmay

2. 66yostagea

3. muchdesign

4. [sTAGEN]

5. Fra

6. Fastrotor

7.

8.

9.

10.

Group Buy Closes in 3 weeks, but I could arrange prior shipping of coolers as required/payment received, as long as we get 10 people in the end.

I was involved with the last group buy of these awesome valued 'coolers from Alex; received the item damn quickly, perfectly wrapped up etc, and was very impressive service indeed, to say the least.

Absolute bargain for this group buy price, Definately well worth the money in my opinion.

If you've got an auto Skyline and havent bothered upgrading the oil cooler as yet, then why havent you? Easy upgrade, and very cost effective too! (dont want that auto to overheat!)

:ermm:

Brendan

Updated the list with all those people that contacted me through PM or otherwise to let me know they were interested.

Cmon lets get more names!

Dont fool yourself, your tranny will overheat just as much in winter as in summer!

Updated the list with all those people that contacted me through PM or otherwise to let me know they were interested.

Cmon lets get more names!

Dont fool yourself, your tranny will overheat just as much in winter as in summer!

Yeah put me down for one please.

Gary.

  • 2 weeks later...

anyone else?

So far:

humble

bwilkeson

pkblade

skidkid x2

wagon

AMS

Nightcrawler

MR_RS4

gr3ddy

[sTAGEN]

Fastrotor

SWC945 (didnt get it direct through me, but I assisted him in getting the same deal/product)

66yostagea (being sent this week)

All happy participants....

90% of all transmission failures happend because of overheated transmission oil. When you go faster, it causes more heat, which causes more slip, which causes more heat and so on. These will help you cut down the temps those crucial extra degrees!

  • 2 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I would be looking at the tune mate. How do you know that you have such a low dynamic compression?  I had to dumb mine down because it was too jumpy when taking off (too much torque).  What ECU? Do you need help with the tune? 
    • Surely the cam timing is set to something stupid at low RPM?
    • Hi guys, Sorry to butt in and take it slightly off course, although still on the VCAM subject.  I had VCAM put into my Tomei 2.8 bottom end and I struggle to take off because the engine has very little torque caused by VERY low dynamic compression at 60psi. But once off the mark and especially on boost, the engine rev happily all the way to 8000rpm and makes 630hp at 20psi of boost on E85 at the rear hubs. Has anyone had any similar experience or any suggestions on what might cause this low compression at low rpm? I am in the process of converting it into a 8hp transmission and with this low torque, the engine would not even stay running until the throttle is opened to more than 30% and then I loose all vacuum. 
    • Last year I got a set of MCA street coilovers for my turbo Forester after my son hitting a concrete gutter/wall on a small bridge causing the whole drivers side suspension to get bent because the rain just made the car slide out I love them, I think they were $2400. even had a hiccup of have the wrong hub configuration (my fault) so got onto MCA and they sent the correct shock ends overnight parts from QLD, for free!  I was very impressed with their customer service and quality of the product  
×
×
  • Create New...