Jump to content
SAU Community

Fs: R32 Gtr

godzl1975
 Share

Recommended Posts

godzl1975 Experienced

godzl1975

Posted
Posted (edited)

Hi

Have a highly modified R32 GTR that iam thinking of selling want to see if there is any interest for at the price iam wanting to get, car located in sydney.

Imported by me so iam the first owner fully registered with 12 months rego as just got it re-done has only done 8000km since being in australia. Here is list of modifications. Always serviced regulary with Motul oil always replacing fuel filter with every change. Gear box and Rear Dif Oil just done with Lightweight Shock Proof and Motul FFF LSD.

Dynoed at 20psi 360rwkw, 300rwkw at 1 bar tuned by JEM, these are safe tunes as its used as a daily driver.

96,000K on clock

2.6 litre twin turbo coupe with anR33 GTR engine and Trust 618z turbos

ENGINE AND ELECTRONICS

APEXi Power FC and FC Commander unit

HKS EBC

Forged Pistons

TOMEI 260 degree cams

TRUST adjustable cam gears

HKS 1.2mm head gasket

HKS metal gaskets for plenum and exhaust manifolds

Sard 680cc injectors

SARD fuel regulator

N1 water pump

HKS delivery pipe

Bosch intank 044 pump

Polished Plenum

Oil catch like the powerplay ones + oil Air separator

Cusco Intercooler Intake pipes with Custom Turbo Intake Pipes (aluminuim)

Custom Carbon Fibre Air Box with CAI

Cusco master cylinder brake stopper

Z32 airflow meters, new apexi pod filters

Dual core radiator with cusco air panel diverter

TRUST dual core Intercooler 75mm

TRUST oil cooler and oil filter relocator Power Enterprise magnetic oil filter used

OS Giken twin plate clutch with lighten flywheel

R33 Brembo brakes front/rear with Earls braided brake lines F/R

NISMO circuit link suspension parts

AS - front pillar brace bar, for more rigid chasis

Chasis has been Pop Riverted for extra rigidity from engine bay to front cabin

Adjustable Front Upper Arms (camber)

G4 - Height and dampner adjustable suspension

ARC adjustable castor rods

Rear HICAS cancellation bar

ARC front and rear strut tower braces

ARC front and rear sway bars

NO ABS

TRUST dump/front pipes

3n1/4 inch Kakimoto stainless steel exhaust

Hi flowed Catco cat converter

Push Start Button with kill switch

Battery relocated to the boot

RWD toggle switch made by Dirt Garage

GReddy Electronic Boost gauge and HKS oil temp gauge

4WD controller by Raceworx installed (Duncan)

Turbo timer

Trust Gear Knob

3point immoboliser with auto window lifter, works with turbo timer

Rays Engineering 17x10inch rims, chrome outter and gold innner 2 piece rims 255x40

N1 front bar with front lip on bonnet (carbon fibre)

N1 head lights

N1 lip on the boot

N1 style side skirts

Kenwood MP3 player with Clarion 6inch splits, Clarion 6inch rear speakers

Looking for 30K mark

Edited by godzl1975
Link to comment
https://www.sau.com.au/forums/topic/111758-fs-r32-gtr/
Share on other sites
godzl1975 Experienced

godzl1975

Posted
  • Author
Posted
anymore pictures of the body and interior? idea of wat sort of power its making?

will have more pics of body soon...will put em up as soon as get the skirts on etc....making around the 570 ps mark..not sure how it is converted back to kw..anyone?

Link to comment
https://www.sau.com.au/forums/topic/111758-fs-r32-gtr/#findComment-2072857
Share on other sites
godzl1975 Experienced

godzl1975

Posted
  • Author
Posted
570ps!!??@ all wheels or @ rear wheels at what boost?? thats 570x 0.7355 = 419.235kw

Thats up there for 2530 turbos but has been done by Paul Deimar

G Luck with the sale

dont think 570 ps at the wheels....i will be getting it dynoed soon..so will post up then.

Link to comment
https://www.sau.com.au/forums/topic/111758-fs-r32-gtr/#findComment-2081936
Share on other sites
  • 11 months later...
jakegts Rising Star

jakegts

Posted
Posted

Hey Aaron,

Still very interested! I have the cash and want to buy it after the compression and leak down test as well as the NRMA inspection and mechanics report.

I will pay for all the reports and documents as well as the time you took to get car there and back so your not out of pocket or time.

Please answer your PM's so i know whether or not to stop looking at other GTR's. Looking for a car and want to buy pretty much immediatley.

If something else jumps out like your car i might consider buying it if i cant get a response.

Thanks and let me know

Jake

Link to comment
https://www.sau.com.au/forums/topic/111758-fs-r32-gtr/#findComment-2994244
Share on other sites
jakegts Rising Star

jakegts

Posted
Posted

sale is quite old but Aaron PM'd me a few weeks back within my WTB ad for his car.

Negotiated for a week or two and pretty much agreed to a price if mechanics report, NRMA inspection and compression test came up healthy.

Since i asked for these i havntheard from him. Which isx sad cause his car has everything i want in a GTR.

Hopefully he has a read of this and gets back to me and i am looking to buy a car very shortley.

Would love a GTR but if i cant find one that i love then i might buy a S15.

AARON HIT ME BACK or i have to look for a S15.

Anyone that has a GTR like Aarons please PM me as i am looking and i have cash in hand right now!

Link to comment
https://www.sau.com.au/forums/topic/111758-fs-r32-gtr/#findComment-3008509
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Fixing exhaust position?

      By Kinkstaah · Posted

      I'd want an even MORE side on view. More or less you want to make sure the outlet is actually square with the outermost part of the bumper. Or you end up getting soot all over your bumper from your hektik exhaust. In any case, it looks pretty close. I think the way to fix this is probably more of an overhaul at an exhaust specialty shop if you want tips that are rounded off or sit nicely with the bumper but have proper clearance and don't move - Probably more of a redesign than a quick fix. I've pencilled in my own exhaust with its own various problems, pinholes, PITA fitment, and other issues and can see myself going to a shop and saying "JUST DO THIS BUT BETTER?"  Which is gonna work better than any more small fixes. I'm gonna chime in here officially with "from an outsider perspective this exhaust looks fine so this is self OCD probably" (which I also suffer from)
    • joshuaho96
      RB25DET Engine Oil Dipstick Length

      By joshuaho96 · Posted

      Reminds me I really need to install that HKS oil cooler I bought years ago.
    • GTSBoy
      RB25DET Engine Oil Dipstick Length

      By GTSBoy · Posted

      It be 40°C outside lately. 10W60 is a good idea here. Well, certainly 10W50.
    • PranK
      Fixing exhaust position?

      By PranK · Posted

      Here are some side on's.
    • joshuaho96
      RB25DET Engine Oil Dipstick Length

      By joshuaho96 · Posted

      I just did an oil change on my daily which used oil that is probably 2-3 years old. Normally I try to follow exact viscosities, but my LS400 is fairly tolerant. Dumped something like half a quart of 0W30 Mobil1 ESP X2 in there, followed by 2 quarts Pennzoil 5W30, followed by ~1.2 quarts of liquimoly 5W30 LL04 spec oil. Then the rest was QS euro 5W40 which is actually so thin it's basically a 30 weight oil. All this is to say it doesn't matter that much. We aren't talking about brake fluid. For an RB I would recommend a high ZDDP oil because it doesn't use rollers in the interface between the cam and valve, but a 5W30 or 5W40 is fine to use for street use. The 10W60 guidance really only applies if you're getting it hot and pushing the engine hard.
×
×
  • Create New...