Jump to content
SAU Community

Interior Re-trimmers

silkishuge

By silkishuge,
in Victoria

 Share

Recommended Posts

silkishuge Enthusiast

silkishuge

Posted
Posted

Hi,

This is my first post on this forum. My other half spends his time on Nissansilvia forums. Perhaps I should start my own username......

We had previously done a little research on where we should get our car re-trimmed. We have just finished improving most of the exterior of the car and are just waiting for the rims to arrive. Its been 10 weeks now but it should be getting here anytime soon. According to my worse half, Charles from JDM is reliable and honest.

Anyway, the parts we were looking to re-trim are front and rear seats, the dash, the pillars and the roof, the centre console. Might do the carpets as well. Can someone please offer recomendations as to where a good, reliable and not over priced place to get this done. The budget we have is set to a upper limit of $5,000. Only the seats are to be re-trimmed in leather, but everything else is vinyl.

The colour I was a combination of red and black. red door trims, glove box, gear boot and brake cover. The seats will be red in the centre and black on the outside of the seats. Oh, by the way, the car is a Nissan 180sx. What do you think of this combination? I will appreciate all constructive comments.

Thanks,

Mie

Link to comment
https://www.sau.com.au/forums/topic/111885-interior-re-trimmers/
Share on other sites
khunjeng Veteran

khunjeng

Posted
Posted

ok there is a place in Richmond that is highly recomended. seen some really good jobs in my FTO club...door trims, seats dashes etc. can't rem. the name...like Melbounre Dash or richmond dash or something...take ur car down and they tell u the deal...costs were good also. sorry can't remember the name.

Coupe-This Grand Master

Coupe-This

Posted
Posted

what area are you in ? there is a momo/recaro stockist, that fully retrim seats in leather, and everything, use a1 retrimmers and quality is good, seen a little bit of their work. They are on cheltnmen road moorabbin, near southland.

there is also another place in moorabbin called blackmans, although i havent seen any of there work, they have a godamn big workshop. And im sure they would have a webaddress on the internet. Plus if your looking for a perfect showcar standards, you will most likely pay more than what your budgeting for, as in leather i think its about 1.5 per front seat and 2 for the rear, but these are just rough prices i have gotten before, never an actual quote.

So ring up, go look at their workshop, ask to enter and have a look at some of the work being done.

Good luck...

*awaits comments about ns.com to start*

silkishuge Enthusiast

silkishuge

Posted
  • Author
Posted

hmmmm, thank you for all your responses.

I am located in Box Hill South. I will have to travel quite a bit to get to those places.

I think I have heard of Blackmans. They do the leather re-trims for Mazda at Moorabin. The sales people at Mazda said that they were quite good and it cost $2,500 to re-trim all the seats in leather.

Coupe-This, thank you for the advice. I think I will have to increase the budget........ Will $5,000 get me a middle range quality job for the re-trimming the entire interior? I better talk this over with him. We did not think it would cost that much.

Mie

khunjeng Veteran

khunjeng

Posted
Posted

As for the seats I just saw my mates FTO with new front/back seats and door trims in read leather from the place in Richmond...was damn sweet. was real/high quality leather not crapo letherette for 500. I think it cost him about 1500 all up.

Unique Auto Interiors

140 Cromwell St

Collingwood

VIC, 3066

Australia

&

This place has seom stuff for R33s and I have head good things about the re-trims for the dash

Croydon

http://www.dashboardcentre.com.au/

Jamezilla Grand Master

Jamezilla

Posted
Posted

Top notch work here - but don't expect it to be cheap:

http://www.garryblackmantrimming.com/

A friend's cousin runs a trimmer in Thomastown (getting details for you). They regularly show up at Autosalon etc and were the ones who did that Valiant Regal for the radio station a while back. Good quality.

inark Grand Master

inark

Posted
Posted
what area are you in ? there is a momo/recaro stockist, that fully retrim seats in leather, and everything, use a1 retrimmers and quality is good, seen a little bit of their work. They are on cheltnmen road moorabbin, near southland.

there is also another place in moorabbin called blackmans, although i havent seen any of there work, they have a godamn big workshop. And im sure they would have a webaddress on the internet. Plus if your looking for a perfect showcar standards, you will most likely pay more than what your budgeting for, as in leather i think its about 1.5 per front seat and 2 for the rear, but these are just rough prices i have gotten before, never an actual quote.

So ring up, go look at their workshop, ask to enter and have a look at some of the work being done.

Good luck...

*awaits comments about ns.com to start*

the momo/recaro ones on chesterville road... (if its the same one im thinking of... its been there for years now before the Waves pool heading from south road to southland or have they moved?).

Blackmans are 5 star quality... not only mazda but BMW and Mercedes all trim their cars there... not to mention almost every car manufacturer in the area. They retrimmed my uncles mates hot rod... awesome job and the leather is so soft and comfy.

silkishuge Enthusiast

silkishuge

Posted
  • Author
Posted
Yep two thumbs up for garry blackman in richmond....retrimmed my steering wheel, gearstick and handbrake boots in alcantra.

Top work!

Hi ant, how much did it cost you all up for the retrim?

Jon

silkishuge Enthusiast

silkishuge

Posted
  • Author
Posted
skyline gtr seats are fairly nice and give it u bit of an upgrade at a fraction of the cost. im pretty sure they dont have skyline written on them

I have got S15 seats in a 180sx. They are a good improvement to the stock ones with alot more back support and look much better for a retrim.

silkishuge Enthusiast

silkishuge

Posted
  • Author
Posted
Top notch work here - but don't expect it to be cheap:

http://www.garryblackmantrimming.com/

A friend's cousin runs a trimmer in Thomastown (getting details for you). They regularly show up at Autosalon etc and were the ones who did that Valiant Regal for the radio station a while back. Good quality.

Thanks for the link. I have heard good things about them and yah, the work they do is not cheap, but you get what you pay for.

Jon

silkishuge Enthusiast

silkishuge

Posted
  • Author
Posted
car trims in burwood. they did a good yet simple job for me. they always have top quality cars in the workshop having work done.

Burwood is near where I live, might give drive over to have a look at some of their work. Thanks mate.

khunjeng, $1,500 for the work done is cheap, definately worth investigating. Thanks.

Jon

Ant97GTR Grand Master

Ant97GTR

Posted
Posted

Well all up including the gearstick/handbrake boots as well as the steering whell it was around 400-500 mark. Bare in mind that I had it done in alcantra which is one of the most expensive materials.....normal leather would be a lot cheaper I'd imagine.

All I can say is that it was a fantastic job...they did it in 1/2 a day and the blue stitching looks great. Not the cheapest, but as someone said you do get what you pay for.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      Rv37 400r questions

      By sonicii · Posted

      No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
    • sonicii
      HY51 Fuga Hybrid

      By sonicii · Posted

      There is a known issue with the mix door motor on the Q50 which causes these symptoms, not sure if it is common on the Y51 though.
    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      That ring thing is interesting how it's holding everything together 
    • elir32
      Rv37 400r questions

      By elir32 · Posted

      Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Butters
      UniClutch

      By Butters · Posted

      Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
×
×
  • Create New...