Jump to content
SAU Community

Recommended Posts

Greetings to everyone, allow me to introduce myself. My name is is Ivan Tan from Speedworks in Osborne Park Western Australia.

Recently its been brought to my attention that a lot of things are being said about Speedworks and JUN.

I have read many of the postings and replies and find some statements interesting, others quite derogatory, & yet others rather amusing.

These statements apply to those said about Speedworks and other workshops.

As a member of a professional automotive workshop, I have chosen not to partake in the discussions in this forum as I feel it is more for the enthusiast and members of Skylines Australia.

It is very interesting to see public opinions of workshops and the general motor sport community, however I am disappointed to see that businesses are publicly making defamatory remarks about other businesses.

Concerning derogatory, slanderous or frivolous posts; I shall further decline to make any statement in regard to Speedworks, however I will state that JUN has been around for many years, even before John Tang became involved with Speedworks.

I would also like to invite everyone to view some of the achievements that JUN has accomplished in their humble motor sport career by visiting their website:

http://junauto.co.jp/democar/index.html?en

Thank you all for your time.

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/
Share on other sites

Hi Ivan.

You guys need to stop Denver shooting his mouth off.

Read his post and see were your problems are.

Ivans a top guy with very good ethics and I wish him well

with his new Dyno. He would do better on his own as many

shops like mine would use his Dyno for our 4wd work

but as it is in Daves hands we must update our own dyno

to 4 wheels.

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/#findComment-188025
Share on other sites

Another point of view (from a simpleton):

Something went wrong with an expensive engine, ie, big money has been spent on it.

I myself, would never spend such an amount on a car and thus, the problems associated with in-depth tuning and the like wouldn't apply to myself and most of the people here.

Most of us want new exhausts, cams, AFC's, dyno runs and the like. Simple stuff so to speak. Therefore most of the slandering that goes on I take no notice of.

Don't know if I'm making much sense but that's how I see it.

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/#findComment-188212
Share on other sites

i say settle it in a 'track duel' like gentlemen.

Grudge match racing, hey thats gona work for all sides and provide some 'good' PR. You might even end up with a tribal sort of rivalry amongst the supporters of each tuning house (kinda like the holden and ford thing).

I believe this sort of tuning house competition is common in japan and would provide a bit of entertainment for the punters.

We could have a points system for the year and have a big industry party and award presentation at the end of the competition year. This sort of thing would be good for the profile of businesses involved in jap-performance tuning.

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/#findComment-188232
Share on other sites

Guys,

When you do visit the JUN website, you MUST MUST MUST download the Quicktime of the Hyper Lemon EVO 5 lapping Tsukuba. This is one of the hottest laps on one of the most technical circuits you'll see - simply awesome !!

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/#findComment-188261
Share on other sites

Keep this civil please people.

To Ivan welcome to our little corner of the net. We'd love the tuners to get on and have a chat give some advice etc.

Yes the forum rules state no company bashing etc, its a legal document and by agreeing to those rules when signing on your stating you will abide by those rules.

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/#findComment-188455
Share on other sites

Denver should never have said a thing.

All work shops have things go wrong but don't have a Denver

to spit out stupid statements like no time to check an

expensive motor before assembly.

Speedworks should be left out of this now and we can all

beat up on denver as he has small guy syndrome.

Speedworks are a premier WA speed house that just need

to lock out a few idiots.

Don't let this incedent stop you going to Speedworks as it

really is a bad luck story and wont stop people getting quatity

work or parts.

Denver is the problem not Speedworks.

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/#findComment-188946
Share on other sites

Steve, you know what, i have a tendency to agree with that. After all the stupid statements that have come from both sides in the past few days. The one thing we can all agree on is that denver should have kept his gob shut. :)

Hes done nothing to enhance the rep of SW and everything to ruin it. Things would have been better left unsaid.

And Denver, im a good mate of yours but, gotta say mate, you ****ed up. As im sure Ivan and AJ will confirm.

Red17

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/#findComment-189256
Share on other sites

tuning houses in japan blow their engines so why shouldnt speedworks blow up some rb's. and they fixed it at no cost!!!! whoa!!! anyway hook us up with some discounts on labour since you r one of us mischief. ive been in nortons type r and thats one fast ride u guyz built there.

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/#findComment-189880
Share on other sites

An opinion from a girl who isn't completely with the technical side of running a car. Just to give you auto business people an idea of how you may appear to the 'non too knoledgeable'

Basically when I am looking to get anything done to my car, I get as many quotes as I can, and I ask people where they have had good service, and no problems. I generally like to stick with one person on each area of my car, because they know what has previously been done.

When I am talking to people to do work on my car, I would generally go with the person who explains everything in detail, and takes the time to show me parts etc. Maybe that is naive, but when you don't know much, you appreciate the time people take to explain what they are doing.

I have to admit that it is very offputting when you hear bad things about a place. I would usually still check them out for price and just to get a feel for them. But for that reason business owners have a right to be upset because of bad press.

I always assume that the larger more popular places are more expensive, I like to go with smaller businesses, because we run a small business, and I know how hard it is. I find small places take a bit more time, and are a lot more willing to follow up on problems later on. If I get an excessively cheap quote I won't go near the place.

It may sound strange, but it is the follow up service that is most important to me. If you have a problem, you like to know that whoever did the work is willing to check it and fix it promptly. It is the most annoying thing when you wait ages to get a job done, it is done, there is a problem, and you have to wait weeks for the person to check it out again. There are always going to be problems in any mechanical device, and I accept this. Having a few problems with things does not phase me, so long as they are fixed.

I hope this gives you auto business people something helpful to improve your service. I have been lucky, not too many problems at all. There are only a few places I would never go to again.

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/#findComment-189991
Share on other sites

I agree that the Parkerbitch should have his mouth sewn shut. Speedies has enough fools on the payroll without getting a hanger on to do the talking. :P

Jash

Mods: I'm pulling the pi$$ so dont delete the thread

GTAAH: Point taken

Link to comment
https://www.sau.com.au/forums/topic/11210-jun-speedworks/#findComment-190099
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah, thumbsup from me. The distant shot of the bay just looks same-same as before.
    • Dad had a court case drag out with them from 1998 to 2004. He was in a not at fault accident, NRMA were the ones who covered the other person. They tried to blame his neck injuries on the fact he'd had an injury in 1981 on his extreme lower back where he slipped a single disc right near the bottom. Had been all cleared from that injury for years. This accident destroyed his shoulder, and f**ked a heap of discs in his neck, and he still has major problems with it to this day. Sarah's sister while on her L plates had a small Suzuki Alto, she had stopped to give way to an ambulance, and someone changed lanes behind her because there lane was also slowing, and rear ended her at 80km/h. (She had been stopped for a few seconds already too!). Car was completely f**kED. NRMA sent the vehicle around to 3 different workshops as they kept claiming "We believe it can be repaired, and not written off, we just need to find the correct workshop". It took 3 months, and a lot of arguing before they'd concede and wrote it and paid out. About two years later her sister had a Lancer, someone pulled out of a stop sign without stopping (in an 80 zone). Her sister swerved, hit the front of the other persons car (Instead of dead t-boning the drivers door), which ramped her Lancer, and made it roll multiple times down the road. It hit every panel on the way through. Her sister had slid her self out of the car, and remembers the ambos walking to the accident (They'd been sitting at a set of lights just down the road and witnessed it) and they were saying "Well, this ones going to be a fatality, no way you can walk away from that". Well, she did. And then NRMA sent two assessors out to look at the car, both of which wrote it off. They tried to send another assessor out, except a HUGE uproar was raised, and they FINALLY paid it out. That was on a car, that had damage to EVERY panel, you could see from 100m away the whole car was also twisted, roof bowed etc. Nah, we'll try get out of needing to payout on a $10,000 car... Her sister ended up with major shoulder reconstructive surgery being required, and was permanently limited in her ability to do her job as a nurse after that, as she can't (And was told before surgery too this would be guaranteed to happen) regain full strength in that shoulder. However, there was no choice to not have it, as she could barely use her arm, which was her dominant one, and was in near constant major pain. (And she's the type of person that would try and walk off a broken leg!) NRMA did the biggest run around on the personal injury side too for about 18 months, even to the point of trying to put 100% blame of the accident on Sarah's sister, even though the other driver admitted she didn't look, and didn't stop, and was charged by the police. Sarah used to have a Barina insured with them. It was a policy setup, paid all 12 months in advance. At the end of the 12 months, Sarah was living with me, I reviewed the renewal, it clearly stated "If you do nothing, your policy will cease on XYZ date". We did nothing, as we moved her insurance in with all of mine and I was with Shannons. We find out 10 months later, NRMA decided, because he DAD had a car insurance policy at the same address as what Sarah's mailing address was (Garaged address had been changed), that they'd put Sarah's (What should have been non existent policy) onto her Dad's month to month charges on his credit card. We had to jump through hoops, to get a refund. They didn't care that we actually found the letter that said "If you do nothing, your policy will cease" they made us prove we had NON COMPULSORY insurance else where before they'd issue the refund, and after they agreed to the refund, it still took another 6 weeks and 3 more phone calls for them to actually process it. They also had two insurance claims from storm damage, and they were an absolute cluster to get resolved as well (one vehicle, one house). Some how, up until about 3 years ago, her parents were still loyal to NRMA too, and we were like "How the hell are you so loyal to staying with them, when other places are so much cheaper, and they've f**ked you over every time you've ever had to make a claim?"
    • I got the four AN10 fitting welded up to the cam covers and started up making the head to sump breather/drain lines. The front passenger side cover I used a 45 up top and a 90 at the bottom into the stock VCT head drain spot (3/4" BPST to AN10 adapter) thats unused on the RB25DET NEO with some speedflow flame shield to protect it from the manifolds heat.   back passenger side was a 90 up top with some flame shield and 45 at the sump end. The rear drivers is 45 at both ends   the front drivers fitting is capped off for now but ready to go if i want to try moving the breathers around. I was told by the fabricator to leave all the welds raw for now to make sure there are no pin hole leaks. A lot of cleaning up, re bundling looms and degreasing to go as well as final assembly on the cam cover baffles. The first real test will be 28th March at a Circuit event. added complexity and more spots for leaks but overall looks relatively neat imo
    • Yeah i think the dash needs to come out. To get the loom or maybe just climate control and radio cluster. My mirrors are done i think the motors don’t work so well after flood haha i need the ac fan, you said you wanted to keep it for your 31 and interior loom not including boot. The wiper motor. I’m not sure how good the window surrounds are on the exterior on the pintara.  I will message you to get your bank details shortly 
    • Just another barrier put up to stop cars being modified. When we're all driving Chinese sewing machines, you won't want to modify it anyway, and you'll likely already have slashed your wrists and be locked up in a padded room for your own protection.
×
×
  • Create New...