Jump to content
SAU Community

Recommended Posts

Hey guys, my turbo kicks in around 3000rpm and u can feel the power increasing rapidly to 4000 rpm, but it seems to just bottle kneck or max out or hit a wall all the way from 4000 through to 6000 rpm at which stage the turbo kicks back in (and i gotta shift). I cant afford a dyno at the moment as im still paying the car off ( and the $1800 insurance -_-) so any suggestions would be much appreciated

Link to comment
https://www.sau.com.au/forums/topic/112164-r32gts-t-turbo-bottle-knecking/
Share on other sites

Spark plug gaps are all good and spark getting through is sweet.

Ah 3000 rpm isnt down low to me, drives me nuts having to drop the clutch at 4000rpm to take off fast -_-

I thought maybe its just the turbo maxing out after 4000rpm, but then i thought it was unusual that it seems to kick back in again at 6000 rpm

Oh well thanks for your help. Cant put a new turbo onto it due to power restrictions damit.

um it couldnt be like the wastegate or something could it?

What about the Computer that organises fuel distribution and such? Any way that could be misfunctioning or set up wrong? Its a pretty standard looking unit, sitting on the top of the engine where u take off the spark plug cover, right?

thanks

well i fancied i did see a drop in boost at these rpm's but i think mainly it just stays at the same spot (about 5 out of 7).

Only work that has been done is the exhaust and new suspension.

I dont know what my boost is set at as i dont have a boost gauge and have very little knowledge on cars made after 1985 so that i am unable to put one in.

Me thinks you running standard CPU

Me thinks you gots a classic case of retard and enrich me does

To much boost perhaps

Anything ringing a bell :D

The std ecu does not have an issue with R&R.

They simply fuel cut.

Ppls have dropped hks2530's on them with an FCD and made 200rwkw on the stock ecu.

R33 ecu... yes major r&r.

Dyno power runs are not expensive. Anywhere from $35 to $80 depending on the shop.

Throw iton the dyno and see what the afr's, boost and power curve are doing.

No doubt it will shed some light on whats up with it, much cheaper than replacing a fuel pump that may not make a difference.

It could be a number of things... for example afm, knock sensors, fuel pump, cas... throw it on the dyno to weed a few of them out.

yeh we serviced it and such so all thats good, ran some injector cleaner through it to, um in a couple of house (5) ill be home and will take a pic of the engine bay and post it here.. although i wouldnt know what to do once its attached, e.g. what to crank it to and such.

ahm ill take it to a dyno i guess so they can adjust the boost and such for me, and get them to check out the cpu and all that, hope it doesnt cost to much, i still owe $10000 on the car zz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
    • Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
    • Ah, should have been clearer. Currently has a flex sensor installed all good to go.    like u mentioned, I’ve only ever known the car on e85, I might hate 98, but I have to try it out first. Everyone says the -5 turbos get pretty laggy on 98 octane tho…
×
×
  • Create New...