skylineakt Posted July 26, 2004 Share Posted July 26, 2004 Yes, he can haha I think I will be giving you a call soon too. Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-953963 Share on other sites More sharing options...
666DAN Posted August 8, 2004 Share Posted August 8, 2004 OK guys here is the news...I've hooked up the igniton harness with no problems. Each one of the signal wires going to the coils has had a 1W 3.3V Zener diode placed in series...REVERSED BIASED. Basically this means that any signal from the e-manage below 3.3V will not be able to go to the coils...meaning that there is NO idle current load on them. This also means that the 5V signal from the e-manage is actually 1.7V...much closer to the factory signal voltage (Zeners work by allowing only a voltage flow over what they are rated as....therfore 5v - 3.3v = 1.7v) I've noticed no ill effects on the auto shifting...in fact it's improved for me as the CAS is now set back to it's factory position, with only the problem RPM points retarded. I hope that for some of you this is good news. Dan Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-972512 Share on other sites More sharing options...
toby19 Posted August 8, 2004 Share Posted August 8, 2004 OK guys here is the news...I've hooked up the igniton harness with no problems. Each one of the signal wires going to the coils has had a 1W 3.3V Zener diode placed in series...REVERSED BIASED. Basically this means that any signal from the e-manage below 3.3V will not be able to go to the coils...meaning that there is NO idle current load on them. This also means that the 5V signal from the e-manage is actually 1.7V...much closer to the factory signal voltage (Zeners work by allowing only a voltage flow over what they are rated as....therfore 5v - 3.3v = 1.7v)I've noticed no ill effects on the auto shifting...in fact it's improved for me as the CAS is now set back to it's factory position, with only the problem RPM points retarded. I hope that for some of you this is good news. Dan Sounds fantastic to me! More kilowatts in th making! Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-972697 Share on other sites More sharing options...
Abo Bob Posted August 8, 2004 Share Posted August 8, 2004 Cool I can't wait to see a dyno graph scanned Dan. Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-972836 Share on other sites More sharing options...
666DAN Posted August 9, 2004 Share Posted August 9, 2004 Forgot to mention that the check engine light comes on when the harness is wired in, this is due to the ECU self-check on start-up. This can be eliminated by getting the GReddy e-manage ignition signal adaptor…as far as I know this is only applicable to the R34 and WGNC34. This however doesn’t interfere with the performance of the car, just is annoying to see it on the whole time. http://www.mohdparts.com/emanage/index.htm Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-974943 Share on other sites More sharing options...
666DAN Posted August 10, 2004 Share Posted August 10, 2004 Another thing guys....the e-manage 100% allows the timing to be advanced...I know this has been a source of discussion as to how it does it....it just does At Idle advancing 10 degrees there is a noticable change in pitch from the engine, retard 10 degrees and it reverts back to normal. Proving the "psychic" abilites of the e-manage to predict the timing and therefore advance it actually works!!! It's actually most likely as someone suggested...running the timing a cylinder out and reordering it in the correct firing sequence....to mimic and advanced state. Dan Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-975005 Share on other sites More sharing options...
Sydneykid Posted August 10, 2004 Share Posted August 10, 2004 OK guys here is the news...I've hooked up the igniton harness with no problems. Each one of the signal wires going to the coils has had a 1W 3.3V Zener diode placed in series...REVERSED BIASED. Basically this means that any signal from the e-manage below 3.3V will not be able to go to the coils...meaning that there is NO idle current load on them. This also means that the 5V signal from the e-manage is actually 1.7V...much closer to the factory signal voltage (Zeners work by allowing only a voltage flow over what they are rated as....therfore 5v - 3.3v = 1.7v)I've noticed no ill effects on the auto shifting...in fact it's improved for me as the CAS is now set back to it's factory position, with only the problem RPM points retarded. I hope that for some of you this is good news. Dan Hi Dan, what does "with only the problem RPM points retarded" mean? Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-975620 Share on other sites More sharing options...
666DAN Posted August 10, 2004 Share Posted August 10, 2004 SK...my car is an N/A with a turbo bolted on....problem RPM points just reffered to the factory ECU...where the timing is a bit too agressive under boost. It's the odd RPM point through the MAP that needs to be retarded a tad. Dan Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-976372 Share on other sites More sharing options...
deano_33 Posted September 4, 2004 Share Posted September 4, 2004 A little off topic but I remember reading in a magazine that Apexi are now making power fcs for auto chasers, so they must have come up with the know how to control the shifts. Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1000133 Share on other sites More sharing options...
Sydneykid Posted September 4, 2004 Share Posted September 4, 2004 A little off topic but I remember reading in a magazine that Apexi are now making power fcs for auto chasers, so they must have come up with the know how to control the shifts. Toyota shift logic is not the same as Nissans, not as good either Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1000152 Share on other sites More sharing options...
666DAN Posted September 7, 2004 Share Posted September 7, 2004 Additional bit of news...those who connect the ignition harness and find the engine check light stays on (R34 and WGNC34) The supplimental harness from Greddy works and prevents the light falsely turning on. Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1004026 Share on other sites More sharing options...
mambastu Posted September 7, 2004 Share Posted September 7, 2004 Wonder if that works on the R33 series 2 as well. I get the engine check light too now I have the ignition harness connected. On another note I tried one of the new GReddy E-manage knock sensor adaptors the other day on my RB25......it didn't work. Just throws a knock sensor fault Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1004063 Share on other sites More sharing options...
ed Posted September 7, 2004 Author Share Posted September 7, 2004 From trust's website. GReddy e-manage Ignition signalAdapter 1 The occasion where in vehicle (ER34 ･ WGNC34 and the like) of neostraight 6 the ignition harness of e-manage is installed, the factthat the check lamp of vehicle side lights up is preventedAdapterThe ｡which is Each ignition signal input of e-manage (ECU side) to the line and theground the ｡which wires To 6CH the ｡which corresponds CODE: 15900906 Price including tax: 1,890 tax removal price: 1,800 Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1004093 Share on other sites More sharing options...
666DAN Posted September 7, 2004 Share Posted September 7, 2004 mambastu....funny stuff I bought one of those knock harnesses too! Yeah it makes the timing retard more than ever...must just be the way the nissan ECU works. The check engine light one is good though, I don't have that annoying orange thing glaring at me anymore It probably would work on the SII as it uses the same coil-packs..... Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1004103 Share on other sites More sharing options...
xRHETTx Posted September 10, 2004 Share Posted September 10, 2004 Thinking of getting emanage and Profec e-01 boost controller for my r32, how does this compare with a powerfc with hand controller and boost kit? The emanage with all options and the profece-01 work out to be cheaper than the special r32 gtst powerfc, with boost solenoid and handcontroller. Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1008801 Share on other sites More sharing options...
Sydneykid Posted September 11, 2004 Share Posted September 11, 2004 Thinking of getting emanage and Profec e-01 boost controller for my r32, how does this compare with a powerfc with hand controller and boost kit? The emanage with all options and the profece-01 work out to be cheaper than the special r32 gtst powerfc, with boost solenoid and handcontroller. Hi xRHETTx, Emanage is an interceptor, it takes signals from the sensors and bends them, so the standard ECU still runs the engine. A Power FC (FC = Full Computer) replaces the standard ECU completely. There is no comparison, you will NEVER be able to do with an Emanage what you can with a Power FC. For an R32 you really should look at tuning your standard computer. A simple rewritable chip upgrade will give you everything the Emanage will, plus a bit more. The Power FC is another couple of steps up of course. So it really depends on your power target and what upgrades you intend to do. Hope that helps Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1009008 Share on other sites More sharing options...
latinracer Posted September 11, 2004 Share Posted September 11, 2004 Hey all... Im needing some help with the E-manage... im looking to see if anyone has some fuel maps that they could share or dissuss with me... its for a Rb20det engine...its not in a skyline but i thought this would be the best place to ask for a helping hand.. Thanks Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1009447 Share on other sites More sharing options...
Dr_Drift Posted September 13, 2004 Share Posted September 13, 2004 Thinking of getting emanage and Profec e-01 boost controller for my r32, how does this compare with a powerfc with hand controller and boost kit? The emanage with all options and the profece-01 work out to be cheaper than the special r32 gtst powerfc, with boost solenoid and handcontroller. Remapping the original ECU is probably the best option. PM or e-mail me if you need further details... Sam. Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1010436 Share on other sites More sharing options...
hayes_666 Posted November 4, 2004 Share Posted November 4, 2004 Hi Guys i have just bought the emanage for my r32 gts-t with the ignition and fuel looms, but in the box with the main unit there is a small resistor and a connector in a seprate bag, now i have looked through the manuals but cannot find were this is to be used, i have the e-manage in the and the car runs, but i dont want to go to far without finding what this is for?, any help is good?. Thanks Nathan Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1078000 Share on other sites More sharing options...
ed Posted November 4, 2004 Author Share Posted November 4, 2004 Hi Guys i have just bought the emanage for my r32 gts-t with the ignition and fuel looms, but in the box with the main unit there is a small resistor and a connector in a seprate bag, now i have looked through the manuals but cannot find were this is to be used, i have the e-manage in the and the car runs, but i dont want to go to far without finding what this is for?, any help is good?.Thanks Nathan Look on page 46 (Section 19) It is for some mazda motors. Link to comment https://www.sau.com.au/forums/topic/11234-what-is-the-greddy-e-manage/page/7/#findComment-1078012 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now