Jump to content
SAU Community

R33 Thermostat


Recommended Posts

Guy's follow the bottom radiator hose up to where it joins the motor,,,thats the stat cover,,,3 bolts from memory.

The stat is the same as a VL 3.0L,,,Nissan Part No is 21200-42L05 and it fits all R33's.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/11244-r33-thermostat/#findComment-195749
Share on other sites

  • 6 years later...

ok guys, there are a few things to know here:

firstly for the money and time saving just get a genuine nissan one from nissan parts. they are around $50-60.

second, if you want a 'tridon' one...the part number is TT268-170. this is the 77deg one. there is an 85 deg one...dont get this!

lastly if you want to waste money, get the nismo one but these are over $100 if not closer to $150 and open at 67 or so deg.

you will also need gasket goo for this as there is not a norml gasket there. i use the blue stuff...works perfect!

Link to comment
https://www.sau.com.au/forums/topic/11244-r33-thermostat/#findComment-4606827
Share on other sites

bellow i attached instructions from the RB engine manual.

view order 3 then 1 then 2. (sorry i didnt rename)

as the above people have said use either the tridon or stnd nissan one.

tridon will set you back about $28 and its one of the good cheapies.

make sure the jiggle pin is pointing to the top of the motor.

for gasket sealent i recomend a product from loctight.

Its a silicone based gasket goo, its loctight blue something or other.

It's the ducks nuts, will come in handy down the track to.

let us know how you go.

post-55273-1242824646_thumb.jpg

post-55273-1242824666_thumb.jpg

post-55273-1242824704_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/11244-r33-thermostat/#findComment-4606908
Share on other sites

was reading a thread recently and a workshop operator said he'd been through a bunch of tridon thermostats that were crap, and caused problems.

just use the nissan one. also there is no reason to use a lower temperature it will NOT help you, it just means your car won't get up to temp and you'll lose fuel efficiency.

Link to comment
https://www.sau.com.au/forums/topic/11244-r33-thermostat/#findComment-4608777
Share on other sites

  • 2 years later...

hi guys on my r33 gtst 1993 it has a braided cable that runs down threw the chassis and comes out next to the exhaust, and theres something that attaches to that which im not sure what it is or where to get another one because i scraped going over a speed hump and its pulled it out and stuffed it and i think its shorting out, my thermostat light is staying on and check engine also comes on itermitently. Any help on where i can get another one of these, and or what it is would be good cheers

Link to comment
https://www.sau.com.au/forums/topic/11244-r33-thermostat/#findComment-6110663
Share on other sites

  • 2 years later...
hi guys on my r33 gtst 1993 it has a braided cable that runs down threw the chassis and comes out next to the exhaust, and theres something that attaches to that which im not sure what it is or where to get another one because i scraped going over a speed hump and its pulled it out and stuffed it and i think its shorting out, my thermostat light is staying on and check engine also comes on itermitently. Any help on where i can get another one of these, and or what it is would be good cheers

Disconnect it, it's useless. Pull out your passenger seat and delete that sensor

Link to comment
https://www.sau.com.au/forums/topic/11244-r33-thermostat/#findComment-7274366
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Adjusting the idle screw is usually (emphasis on usually) just covering up deeper issues. Stuff like the cold start valve not closing properly. Throttle shaft seals on the way out. Coolant temp sensors getting out of spec. Coolant temp sensors especially can be a bear to diagnose because they can fail subtly. My dad just spent weeks chasing down his high idle. He cleaned the coolant temp sensor and everything but the resistance curve just drifts over time and if it's been 20+ years they also get super slow to respond as well. Has a massive effect on fuel economy as if it's off the ECU is going to run richer and command high idle for far longer than it should otherwise.
    • How old is the battery, it's more likely your battery is on its way out.
    • I reckon you'd get 90% off. My washer doesn't get between spokes very well. Haha! I love my Gerni!  Argh! Steam cleaning has its place for sure.
    • Hey all, I did a voltage test with the car (video attached) not running for 3 days. And here is some interesting stuff: - Battery voltage is 12v (I had the key in the ON position) - Drops to 9.76v while cranking then quickly goes up to 14.5v - You will notice there was a sorta slow start but not as slow as it usually is. - Idle surprisingly was better at just over 1,000rpm instead of 1,100 rpm. - I turned on the A/C, radio and headlights in the video and the voltage remains the same - I haven't cleaned the grounding wires on the chassis yet, that's next. - Battery drops to 12.6v when I turn off the car and wait a bit Seems like I might have a parasitic draw? I do have an immobiliser system which does drain the battery more of course but was wondering if there is anything else I should be looking at fixing? Does the ground wires on the chassis have anything to do with the low 12v?        SAU.avi
    • My lord that is some low oil pressure as minimum in the manual! I guess the big part will be seeing how it changes as the engine gets more spirited use.
×
×
  • Create New...