Jump to content
SAU Community

Recommended Posts

Ok, now the interesting part. I don't have the gear to get under my car until I visit my olds this weekend. Just how hard is it to get the oil from out of the can into the top of the gearbox? What tools did you guys use, if any? Or can you just put it in a small coke bottle and slowly transfer it?

I took my car to my friendly local Better Brakes workshop and they did it for free. They were gonna charge me $10 but in the end they didnt care coz our family has been getting brakes thru them for years.

Probably cost you $25 elsewhere which I would advise to do coz its cool looking under your car and seeing all the bits that you don't normally see :D

I changed my g/box oil yesterday , I used Castrol VMX80 , seems to have helped but not cured it entirely . The redline oil is next on my list . It really looks like if you have this crunching problem in your gearbox , it may be a good idea to go straight for the Redline shockproof oil .

Damn those g/box drain and filler plugs were soooo tight had to put a 3 foot pipe on the end of my ratchet to get them off .

Has anyone heard of any sort of g/box additive that could help this problem ? Just a thought .

I should've gone the Redline straight up , ahh well we live and learn !

"Has anyone heard of any sort of g/box additive that could help this problem ? Just a thought . "

put in a tube of nulon G70, that should help it. i put in a tube of that with the last gear box oil change. just wondering, can you just add that tube in without doing an oil change?

  • 3 weeks later...
Guest k34_56

hello....

i have an ER34 and i tink i have the same problem. i never knew how to describe it but i think crunch is the right word! the mechanic who checked the car used the word backlash and that there was nothing wrong with the gear box.

i'v replaced my gear oil with kaaz, but problem still there.

now, when i shift from 1st to 2nd, i paused a moment in neutral before shifting into 2nd gear.i do not feel any crunch whenever i did this.

juz adding my 2 cents ;) !

I get all brake work done at "Better Brakes" in penrith along with my mum and sister) and he said they normally charge $10-20. But in the end he did it for free.

Apparently tlai told me the other day that CRD were gonna charge $160 to supply/fit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...