Jump to content
SAU Community

Recommended Posts

Ok, now the interesting part. I don't have the gear to get under my car until I visit my olds this weekend. Just how hard is it to get the oil from out of the can into the top of the gearbox? What tools did you guys use, if any? Or can you just put it in a small coke bottle and slowly transfer it?

I took my car to my friendly local Better Brakes workshop and they did it for free. They were gonna charge me $10 but in the end they didnt care coz our family has been getting brakes thru them for years.

Probably cost you $25 elsewhere which I would advise to do coz its cool looking under your car and seeing all the bits that you don't normally see :D

I changed my g/box oil yesterday , I used Castrol VMX80 , seems to have helped but not cured it entirely . The redline oil is next on my list . It really looks like if you have this crunching problem in your gearbox , it may be a good idea to go straight for the Redline shockproof oil .

Damn those g/box drain and filler plugs were soooo tight had to put a 3 foot pipe on the end of my ratchet to get them off .

Has anyone heard of any sort of g/box additive that could help this problem ? Just a thought .

I should've gone the Redline straight up , ahh well we live and learn !

"Has anyone heard of any sort of g/box additive that could help this problem ? Just a thought . "

put in a tube of nulon G70, that should help it. i put in a tube of that with the last gear box oil change. just wondering, can you just add that tube in without doing an oil change?

  • 3 weeks later...
Guest k34_56

hello....

i have an ER34 and i tink i have the same problem. i never knew how to describe it but i think crunch is the right word! the mechanic who checked the car used the word backlash and that there was nothing wrong with the gear box.

i'v replaced my gear oil with kaaz, but problem still there.

now, when i shift from 1st to 2nd, i paused a moment in neutral before shifting into 2nd gear.i do not feel any crunch whenever i did this.

juz adding my 2 cents ;) !

I get all brake work done at "Better Brakes" in penrith along with my mum and sister) and he said they normally charge $10-20. But in the end he did it for free.

Apparently tlai told me the other day that CRD were gonna charge $160 to supply/fit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stunning car.  Looks amazing!  You're in the UK?  How the hell do you stop your car rotting away beneath you?  British cars are the WORST I've ever seen in regards to rust.  Some of the cars SR Autobody have done are borderbeyond saving.
    • not a date code? or a foundry code? 
    • I have up to date pics of the engine build and turbo conversion over on my instagram @skpro_jects if you want to take a deeper look.   Basically the exhaust manifold is straight bolt on and the ports match (they arent any smaller than a 25 or 26 head).    the intake ports are different shape so the 20/25det manifold will bolt up but wont match properly or seal. You will need to port match using the 25det gasket as a stencil. Personally i ran the entire stock 20neo intake setup and have configured the swirl valves and torque valve to work based on my custom parameters to help with off boost response and spool. But this is using a standalone aem v2 ecu. The stock 20det ecu wont be able to control them.     
    • Hi. a little later but if the topic is here. So...the exhaust is the same and you can use 25/Turbo or any aftermarket? What about intake side? Is it too "plug n play" or? (i do not remember for 100% but i think that one intake to head gasket was little bit different than on the RB25 - i bought gasket kit way back) I know that even if it "plug" those butterfly swirls would cause ECU to be confused or?   Just asking for the info 🙂 and of course the RB25 things are easier to come by  
    • A few more recent pics
×
×
  • Create New...