Jump to content
SAU Community

Recommended Posts

just a q b4 i get some insurance -

does anyone know what the rules are regarding wheels in NSW? ie what size you can go to on an R33 S2 - currently, i have 18x10 DTM 078 (i think they're 10's) with 255/35 rubber? is this legal given the standard wheel size? some ppl say no more than one inch over factory/others say it is based on rolling diameter

thanx

Link to comment
https://www.sau.com.au/forums/topic/11249-legality-of-wheels/
Share on other sites

I read a while back on the RTA site that they're not concerned about going from 16inch to 20inch or whatever, but so long as you get the profile right. This is because if you get the rolling diameter wrong your speedo will indicate a different speed to what your really doing. Which is why the RTA give a sh*t about. I'm stumped as to why cops say you can't go over 1 inch over standard.

Insurance companies however, in general don't let you go over 1 inch in rim width. They don't care about how big the rim is in height but the bigger width means bigger tyres, which means the tyres have a bigger chance of aqua-panning in the wet.

The ADRs have rules about rim width, nothing about diameters. Not sure of the exact width rule, check out the site. I thought the issue was the wheel bearings ability to take the extra load.

Aqua planing is just when the tyres lose touch with the road in the wet, sliding over the water. bad.

they are concerned with tyre width only. coppers only the 1 inch bullshit as a very very broad generalisation, they have simple minds remember?

im definate the 10 inch wide rims wont be allow on any r33.

"...the wheel track must not be increased by more the 25mm

beyond tha maximum specified by that manufacturer for that specific model..."

"...Wheels up to 26mm wider than the largest optional wheel recommended by the vehicle

manufacturer for the vehicle can be fitted without the need to notify the RTA. The outside diameter

of the wheel and tyre combination must be no more than 15mm over the largest diameter wheel and

tyre combination specified for the vehicle and not more than 15mm below the smallest diameter wheel

and tyre combination specified for the vehicle."

wheel track is the distance from the middle of one tyre to the other tyre

Silver-Bitchass, I think you mean "aquaplaning" :D

btw, Nismodified for it right, the only regulation is wheel WIDTH, not wheel diameter. You can go as large a diameter as you like, as long as you don't go more than one inch wider than stock.

R33 GTS-ts came with 16x7 rims, so the largest you can fit is 8" wide rims. If you can find 22x8" rims, more power to you, and you're fully legal.

255 size tyres can fit on anything from 8" to 10" rims... That doesn't tell you much, you'll have to look at the rim, it will definitely have the dimensions stamped on the inside somewhere...

Also, just because you can get insurance for a car with a certain modification, it doesn't mean that it's legal.

Just Cars will insure your car with any modification you want. Quad T51R SPLs, 1000hp direct port NOS with neons on your FUL SIK Charade? No worries. But that doesn't mean that it's RTA legal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome back, glad to hear life's wheel is turning in the right direction
    • Awesome pics Rezz, thanks for sharing them Another stop for my "need to do in Japan" list
    • Hey all, not sure how active SAU is anymore but will ask away anyways. Just wanted to get some experience on the 2008 model GTR CBA model.  I've hit that age in my life (43) where I'm like fk it time to get my dream (midlife crisis) car. Looking at importing one in and seeing if these can be reliable if the main flaws are fixed up. Plan is to keep money aside to do the following straight off the bat to future proof it: * install a stage 1 rebuilt trans with all new bits and pieces.  * install a new Bellhousing from the later model GTRs. Or potentially an upgraded stronger version like MAD or ATR. Besides the above two things and typical maintenance items anything else you'd recommend doing.   Been speaking to a few people and the engine on these are very reliable apparently. But keen on the view of the community here. Hoping to find a nice grade 4.5 with low mileage in Grey. I'd go black but swirls too easy. Look forward to your responses and feedback. Cheers    
    • Do Alan and Keith work on Skylines now? I remember buying stuff from them when I owned my Ralliart Lancer a few moons ago. Definitely genuine guys and be excellent if they dealt with the skyline platform as well.
    • Hey all, I'm Gaston from Sydney's West.  I was a member on here when I was a younger lad and owned a mint R33 GTS-T. Ended up selling it and getting married having kids (yadda yadda) we all know how the story goes. Now I'm back with the intention to get my midlife crisis (dream) car ... a R35 GTR.  You'll see me about asking questions and searching the forums. Good to be back and can't wait to get back an Import again.
×
×
  • Create New...