Jump to content
SAU Community

Recommended Posts

Hi Guys,

Im about to do some serious upgrades to my s15 aiming at atleast 250rwkw and i know that my 6sp box will turn to cactus as soon as this is done and im too poor to go par/dogbox and i dont want to throw away 1300 on a new clutch/fly to go on the 6sp and then get a new box anyway..

i dont really know that much about skylines but i hear that the series 2 r33 box is good for around 700hp which seems pretty much ideal. fyi the clutch im getting is made by orc

so the questions that i have are:

are there any 6sp rwd gearboxes for skylines?

r33 series 2 vs r34 neo? which one is better etc..

upon buying the gearbox what else will i require? i know ill need the housing modified and a new tailshaft

is there anything i should look out for while im doing this?

how will this impact the s15 diff?

sorry for all the questions

many thanks

Link to comment
https://www.sau.com.au/forums/topic/112559-skyline-gearbox-on-s15-help/
Share on other sites

are there any 6sp rwd gearboxes for skylines?

no

r33 series 2 vs r34 neo? which one is better etc..

34 is reportedly better and stronger , but rarer and more expensive .

is there anything i should look out for while im doing this?

they are hard to find cheap or they are expensive when found . obviously try and get a good condition low km one

how will this impact the s15 diff?

should be fine

thanks a bunch for the info arkon

question on the 34box- how much is expensive?

and also is it just the housing and tailshaft that needs to be modified?

with the housing is that something that can only be custom made and not something that i can buyas a part?

recomended places in vic to do such things?

quick update:

buying a brand spankers r33 series 2 box for 3k

will need to get gear stick so might as well get a short shifter.

modified housing. maybe a r33s2 tailshaft or vl depending on availability and custom cross members.

can anyone in melb recommend a good place to get this done?

also as far as clutch goes. orc vs os? thoughts and opinions pls

the gtr or the gtt?

can you tell me anything else about them? like i dunno how much they can take? or maybe even where to get one?

the 350z also comes stock with a 6sp box and that also 200+kw engine...

meh this is becoming a real headache... coz i dont want to break my stock box

quick update:

buying a brand spankers r33 series 2 box for 3k

brand spankers as in brand new never used ? from nissian ?

and do they have anymore ?

i would just get that box or another one like it . the r33 box is a really nice gb . its an immesurable improvement on your s15 one .

jspec racing hehehe

anyways..

I have a R34 GTT Gearbox, picked it up for $1500, with 17,000kms on it, i thrash the absolute crap out of my car, and this box loves it (200rwkw)

if you can afford $3,000 for a new one, get a gearset for your s15 box, would be the same price or around that and less f**king around.

just an idea

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
×
×
  • Create New...