Jump to content
SAU Community

Recommended Posts

ok

NOS is partly o2 in a compressed form which enables more power from say a restrictive intercooler for the same area of oxygen, NOS has a much greater density of o2.

When you heat nitrous oxide to about 570 degrees F (~300 C), it splits into oxygen and nitrogen. When it vaporizes, nitrous oxide provides a significant cooling effect on the intake air. When you reduce the intake air temperature, you increase the air's density, and this provides even more oxygen inside the cylinder.

This overcums much of the flow restriction and heat related power loss. And since NOS is injected after the intercooler....the size of the intercooler has less effect on max power out put.

So as for being pointless and bearing no relevance, that is your veiw. Were I was pointing out that with the assistance of NOS a 10second time with ANY stock cooler would be more feasible.

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

guys i am not trying to find what is better than the stock cooler more the difference between a 600 dollar just jap cooler and a 2500 grand TRUST cooler that both are 600X300X100?

my advice is to talk to the guys at ARE here in Qld - a phone call is CHEAP :)

They may have done the tests you are looking for

They will be able to tell you why not all coolers are created equal

even if you don't buy one of their coolers - I've had a couple of 30 mins calls with them - they are VERY helpful

NO I do not own the company

NO I do not work there either :D

again - my 2c worth

guys i am not trying to find what is better than the stock cooler more the difference between a 600 dollar just jap cooler and a 2500 grand TRUST cooler that both are 600X300X100?

Hi GTR 94,

I think the only way you will get the answer that you are rightly seeking is to do a LOT of research. Try speaking to the distributors ie Advan/ARE/JJ to see how they rate their coolers. Be prepared for a bit of frustration though because it's likely they either won't know or the way they measure wil be different. It's a constant source of amazement that aftermarket suppliers can't provide test results etc for a lot of their big ticket items but people keep buying their stuff so what can you expect? For example some time ago there was a thread on dump pipes - $1800 for CES ones and $1500 for Trust - and no one knows, including the suppliers, what their baseline worth is in terms of performance.

As itbmills wrote, a call to someone like ARE will probably arm you with a whole lot of knowledge regarding how FMIC are rated etc. and it might be best to call them before you speak to anyone else so they know you've done your homework.

Sorry that doesn't answer your question but I think it's the only path likely to yield the info you need. Hope to hear of some good results.

Cheers

Edited by Scooby

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey @Butters, did you end up getting this clutch in ? I have just ordered to a uniclutch track to go in my getrag 6 speed that’s in my BNR 32     
    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
×
×
  • Create New...