Jump to content
SAU Community

Cheap K&n Air Filters..

mr_r33gtst
 Share

Recommended Posts

mr_r33gtst Rising Star

mr_r33gtst

Posted
Posted (edited)

post-24648-1144510279.jpgHey guys!

SElling a K&N FLat Panel AIr FIlter from my r33, but will fit most other nissans such as r32, maxima, vn-vt holdens, and most subaru wrx,and cars using A360 reference number air filter. I am selling it because I dont like driving without the induction noise,cannot get refund as I have opened the plastic packet, so Im goin back to a pod. I only bought this 2 days ago,costing me$119 on special at autobarn,which retails for $139 at normal price.It was on the car for 1 hour.Still have receit, so its pretty much brand new. It has got no dirt at all, clean as new. Comes with box . Selling for $80 FIRM. Prefer meb buyers...SOLD!!!!!!!!!!!!

I also have an extreme Top K&N High Flow Pod which had been on my car for 3000kms. Unlike most pods, it also retrives air from the front of the top. It is is excellent condition, with no dent marks.it is very clean for 3000kms as my car is drivin on the weekends.it is close to new, and it has a 3inch inlet. Selling becasue I am trying out another pod filter. Selling for cheap,as I have bought a pod filter with a bigger inlet. Comes with box as well. $40 FIRM. Will clean and reoil for buyer as well....SOLD!!!!!!!!!!!

I will sell both filters for $110, so you can have one for yourself and give one to your mate!

Please contact me on 0421111542 or pm me if interested..cheers

post-24648-1144510721.jpg

Edited by mr_r33gtst
Link to comment
https://www.sau.com.au/forums/topic/112672-cheap-kn-air-filters/
Share on other sites
Paradizzle Grand Master

Paradizzle

Posted
Posted
Hey guys!

SElling a K&N FLat Panel AIr FIlter from my r33, but will fit most other nissans such as r32, maxima, and cars using 33-2031-2 reference number. I am selling it because I dont like driving without the induction noise, so Im goin back to a pod. I only bought this today costing $119 on special at autobarn,So its not even a day old.Still have receit, so its pretty much brand new. It has got no dirt at all, clean as new. Comes with box and warranty. Selling for $85 firm. Prefer meb buyers

Please contact me on 0421111542 or pm me if interested..cheers

Is their any induction noise at all?? even a little?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      Reading your posts Josh, sometimes I feel like I've gone in a time machine back to the 90's when everyone was doe-eyed and figuring things out for the first time.  I've lost track of how many single turbo GTR's I've seen on track that haven't burnt down lol. Everything has been figured out a long time ago. These things are at the point now where its essentially turn-key to go single turbo. 
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Among other things yes. Making sure to either use an oil pressure regulator or the right restrictor size for your oil pump/range of oil viscosities you intend to run, making sure you plumb the lines correctly, turbo should be placed such that it siphons properly even when the water pump isn't turning so you don't boil coolant in the turbo after shutdown, oil return should be low resistance and also preferably picking the one that is most likely to return to the pickup as opposed to some other irrelevant part of the pan. It's far from impossible to figure this out but I have seen people really, really struggle and if that's the case it's easier to just take the path of least resistance. To me, bolt-on twin turbos are a fixed cost whereas single turbo is almost unbounded.
    • Looney_Head
      R32 GTS-t RB30 sedan

      By Looney_Head · Posted

      Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • GTSBoy
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By GTSBoy · Posted

      Ceramic coating and heat shielding, you mean?
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
×
×
  • Create New...