Jump to content
SAU Community

Recommended Posts

if your looking for a good front stage i would recomended getting 6.5 inch splits.

as for brand go into your local car audio place and have a listen to a few diffrent ones and chose the one you like the best.

if you chose to get splits make sure you get an amp to utilise them.

mr 32

Link to comment
https://www.sau.com.au/forums/topic/112700-32-speakers/#findComment-2077581
Share on other sites

yeah, definately go the 6.5" splits, just use some MDF and make a bracket for them and off you go...

as for brand, what mr 32 said, goto a car audio place and have a listen, make sure all the settings on the head unit you are testing off are set to flat, and the loud is off too, gives a better becuase you want the flat sound of the speaker to be the best sounding compared to othe ones, not the modified or bass boosted signal...

Link to comment
https://www.sau.com.au/forums/topic/112700-32-speakers/#findComment-2077619
Share on other sites

as long as you make sure the magnets are going to clear the window when it's down, 6.5" splits are very nice in the front, fit i there pretty easy too... my mtx's have heaps of room between the window and the magnet, kenwoods are pretty thin too, not sure about pioneer...

post-12416-1144420319.jpg

Link to comment
https://www.sau.com.au/forums/topic/112700-32-speakers/#findComment-2079861
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
    • You talking about the ones in the photo above? I guess that could make sense. Fixed (but flexible) line from the point up above down to the hubcap thingo, with a rotating air seal thingo. Then fixed (but also still likely flexible) line from the "other side" of the transfer in the hub cap thingo up to the valve stem on the rim. A horrible cludge, but something that could be done. I'd bet on the Unimog version being fed through from the back, as part of the axle assembly, without the need for the vulnerable lines out to the sides. It's amazing what you can do when you have an idea that is not quite impossible. Nearly impossible, but not quite.
×
×
  • Create New...