Jump to content
SAU Community

Recommended Posts

hi posting these for a mate all parts are in sydney,PLEASE DO NOT PM ME CONTACT THE NUMBER PROVIDED,all parts are in excellent condition can post anywhere at buyers expense pick up is available as well..... PETER 0404866622

*full hitech exhaust to suit s15 3 inch turbo back including dump pipe ,full stainless with 5 inch wide body muffler (hitech aswell) 3 yrs old only done 20,000km in excellent condition $1000

petesexhaust.jpg

*sr20 greddy manifold(genuine )as new ,polished,can include throttle body $650 ono

sr20plenum.jpg

*sr20 engine complete with wiring but no ecu,done 40.000km,standard internals has cams and cam gears,but needs a number 2 piston $1300

sr20engine.jpg

*greddy 6 cylinder plenum,brand new only on car one day to suit rb25 $700

greddyrbplenum.jpg

*exhaust manifold custom made to suit gt35/40 for an sr20 $300

exhaustmanifold.jpg

*s15 turbo no shaft playwith actuator excellent condition only done 20,000km $300ono

please call the number above for more info cheers

Link to comment
https://www.sau.com.au/forums/topic/112767-s15-and-rb-parts-bonanza-with-pics/
Share on other sites

hi mate i understand your hesitance thats fair enough i vouch for this guy he will be my brotherin law one day,im a member on alot of forums ,and have sold plenty of parts myself i have nothing to hide ,please feel free to contact him ,inspect them and then make you judgement from there thanks

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...