Jump to content
SAU Community

Max Power Out Of Neo

drgnball34

By drgnball34,
in Engines & Forced Induction

 Share

Recommended Posts

drgnball34 Rising Star

drgnball34

Posted
  • Author
Posted

Anyone else gotten over the apparent " 250rwkw " limit using standard compression and pump fuel? My car is geting dyno tuned next week and i will be really dissapointed if the limiting factor is compression.

Busky2k Veteran

Busky2k

Posted
Posted
We have had 305 rwkw out of an R34GTT. Tomei 260 Poncams, R33GTR intercooler, ported and polished cylinder head, standard head gasket (I don't use thick ones) and a Garret GT30. It wasn't all nice to drive, too peaky, lots of lag, poor throtle response.

I'm quite suprised the GT30 didnt fair to well in terms of response? Usually you can get max boost at a tad over 4000rpm on an SR so surely it would have been better on a NEO?

Busky2k Veteran

Busky2k

Posted
Posted (edited)

Well it depends on the setup eg manifold design and what the target boost pressure is. However here's a nice example of a HKS GT3037 (aka GT30R with a custom T25 flanged housing) with a 0.87 housing on an S14;

post-19001-1157454882.jpg

So I naturally would have thought the response would have been better on the RB25?

You can read more about that chart I posted up here;

http://www.nissansilvia.com/forums/index.p...howtopic=185086

(One thing to note is I am not sure if the 0.87 in the HKS T25 flanged is the same as the 0.87 in the GT T3 housings, even with the same turbine...) Sorry for going OT but yeah, interested in how the GT30R works with the NEO.

Edited by Busky2k
Munna1 Proficient

Munna1

Posted
Posted

Interesting topic id say it would be the same for the neo as it is the non neo and obviously depend on the set up.

My question is this, Would a large turbo making 250rwkw easily put less stress on a engine than a small turbo at high boost / peak to above peak efficency?

  • 3 weeks later...
Adriano Grand Master

Adriano

Posted
Posted

Just deciding on a turbo for a customers car, 34gtt, either a 2871inwg in a modified nissan ex housing, or a 3037in wastegate, or a gt35r .84 ex wastegate , he wants 300rwkw, but i think this will be pushing it. Any ideas?(99% street 1%drags)

infected flow Rising Star

infected flow

Posted
Posted
Just deciding on a turbo for a customers car, 34gtt, either a 2871inwg in a modified nissan ex housing, or a 3037in wastegate, or a gt35r .84 ex wastegate , he wants 300rwkw, but i think this will be pushing it. Any ideas?(99% street 1%drags)

1. does the customer have stock internals...?

2.if doesnt want to crack it open hks 2835pro s or 3037 pro s the 2871 you get too much back pressure due to small ex housing.

3. if engine is going to be cracked open i would suggest the gt35r and that will take u way over 300rwkw.

4. if u want a respnsive fun car then i would more inclined to go for the 2835 or 3037 . 2835 pro s is 420ps and the 3037 pro s is 480ps .

cheers

  • 1 month later...
Black_Widow34 Collaborator

Black_Widow34

Posted
Posted
1. does the customer have stock internals...?

2.if doesnt want to crack it open hks 2835pro s or 3037 pro s the 2871 you get too much back pressure due to small ex housing.

3. if engine is going to be cracked open i would suggest the gt35r and that will take u way over 300rwkw.

4. if u want a respnsive fun car then i would more inclined to go for the 2835 or 3037 . 2835 pro s is 420ps and the 3037 pro s is 480ps .

cheers

sorry to bring up this old thread but whats the limits on a NEO RB25DET before you gotta crack it open??? im askin coz i have heard anywhere from 250awkw to 350 awkw which is a big difference... and what would be the best turbo to use (street car looking for good response) up untill internal have to be replaced? would it be smart to just high flow the stock one?

Black_Widow34 Collaborator

Black_Widow34

Posted
Posted
I think 350rwkw is massively over generous.

it would late 5 minutes. maybe.

GCG high flow rocks.

If you are in Melbourne....

350 is over generous hey??? that's what i thought... i just picked up an old fast fours mag of a mate yesterday with the tunning guide for RB20s and RB25s and it says in there that if you wanna run anywhere around 300rwkw on stock internals then you better be very careful... so i guess aroung 270 - 280 would be ok if the tunning is right... once i get to about 200rwkw i mite ivestigate cgc bit more... thanks for you reply..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Hexi
      Dumb rich kid tries modding for the first time

      By Hexi · Posted

      Haha thanks everyone, I'll take everyone's suggestions into consideration. If I do eventually choose a car ill post it here update on the mods I do.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I found the ingredients at larger amounts from a Coffee Shop. 1kg Citric Acid for €8.50 500g Baking Soda for €2.50 I tried it out tonight distilled water (I got from my ACs) and dish soap. It does get bubbly with dish soap. In just two hours the hanger has improved significantly and rubbing against any remaining rust seems to flake it off. I'm going to leave it a little bit longer and see how it goes. I have read that someone even used this solution in an ultrasonic cleaner to clean a seized water pump which brought it back to life.
    • Duncan
      Dumb rich kid tries modding for the first time

      By Duncan · Posted

      If you like more modern stuff than the R series, you should check out a V37 400R, they are pretty mod friendly
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Haha luckily we don't have emissions, inspections, or any laws against power adders here. They only thing they somewhat keep an eye out for are ridiculously loud exhausts. 
    • tidi0x
      CD009 RB Conversion

      By tidi0x · Posted

      Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
×
×
  • Create New...