S13 Front Mount Kit Into A R32

[lows_13]

I saw a front mount kit to suit a S13 that uses the stock side mount pipes, looks similar to these R32 kits.

Because the S13 side mount pipes are very close to the R32 GTS-T setup, would it be possible to adapt one

of these S13 kits into a R32?

Has anyone tried this before?

Cooler 1

Cooler 2

Edited April 8, 2006 by lows_13

[Tangles]

I saw a front mount kit to suit a S13 that uses the stock side mount pipes, looks similar to these R32 kits.

Because the S13 side mount pipes are very close to the R32 GTS-T setup, would it be possible to adapt one

of these S13 kits into a R32?

Has anyone tried this before?

Cooler 1

Cooler 2

Pic of cooler1 is mine! Im using it as a front mount for my R33-based Stagea wagon, so itd definately be suitable for either a R32 or R33 Skyline.

Works a treat too! Its an Apexi intercooler, called a 'Hybrid' (http://www.apexi-usa.com/product_suction_detail.asp?id=215&pageNum=1)

[lows_13]

What did it cost you?

I've found a few S13 kits exactly the same as these one, just wondering where they'll fit an r32.

[Tangles]

What did it cost you?

I've found a few S13 kits exactly the same as these one, just wondering where they'll fit an r32.

eBAY mate! I got it for a few hundred US, plus shipping from Japan (and bought a $200 pipe kit off ebay, cut what I needed to fit; ie 3 x 30degree bends, 3 x 45degree & 3 x 90degree bends, and 4 long straight lenghts as well).

all up paid under $500AUS as I fitted it myself, using 4ply silicone hoses and 3 clamps per join (it aint popping off!)

it flows just fine with a stnd turbo at 12psi, SITC & SAFC controllers, etc. Good for 160awkw atm, and hope for 200awkw when I do the hiflow turbo/inj etc.

search ebay and pick up one in good nick, and give it a total flush with 50/50% kero/metho mix. buy a pipe kit (ie a box of pipes like I did) and fit it your self. Fun fun fun

[lows_13]

Sounds good, i'll have a look on ebay for one.