Rear Seat Removal R32

[darkslide]

as simple as this task probably is, i have been rootin round trying to get the rear bench seat out on my 32 to rewire stezza but can't seem to get it out. is there some trick to it? the bottom part should just pull up and out shouldn't it? help please!

[spin_psycle]

yeh gotta give it a fairly hard pull i think, theres only one clip either side so after a bit of wrestling around u should be able to get it out no worries

[cookie--monster]

just leaver the seat off with a large flat head screw driver, locate the 2 holding points roughly in the centre of each seat area.

[wingnam]

taking the seat out is eazy - there are 2 bolts for the back - they are located down the side - phillips head will work better but you could also use a 10mm(i think maybe 8mm) socket. as for the bottom seat it has two things that go into the body of the car and you just need to push up really hard

putting it back in is the hard part as you have to line up the top peice with the hooks at the top... i didnt do mine right so now there is a huge gap hahahah - cant fix it yet either cos its getting kit fitted