Jump to content
SAU Community

Complete Front Mount Intercooler Kits In Stock To Suit All Major Jap Cars! Only $449!


Recommended Posts

Complete Front mount intercooler kits to suit all Major jap cars

ONLY $449 - LIMITED STOCKS

The front mount bar and plate intercooler kits are constructed entirely of high quality 6061 aluminum and the intercooler core is 100% vacuum brazed. The polished aluminum end tanks are hand TIG welded for a perfect fit. The ambient fin pitch has been adjusted to provide an optimal fin density of 15 fins/inch. This gives the intercooler excellent flow properties as well as a large cooling surface area, and the efficient Bar & Plate core takes advantage of these properties. The piping is all mandrel bent and contains only 1 weld mark throughout the whole kit. The kit includes 1x 600x 300x 76mm intercooler, polished aluminimum piping, all brackets, nuts, bolts, tripple layer silicon hoses, clamps etc.

The kits are designed to be installed DIY and are very easy to install. For installation help please email us or give us a call.

Features & Specs:

-All TIG Welded 6061 Aluminum, polished end tanks

-100% Vacuum Brazed Core

-High Efficiency Bar & Plate Construction

-3 popular Sizes available

-Inlet/Outlet: 3inch

-Low pressure drop w/ only 0.2psi at 15psi of boost

-Tested CFM: 1020 CFM

-Fin Pitch: 15 Fins/Inch

-Four Threaded Universal Mounting Points

e1.jpg d1.jpg c1.jpg b1.jpg a1.jpg

cooler1.jpg cooler5.jpg cooler6.jpg cooler7.jpg cooler2.jpg

FREIGHT: (all items are sent out by registered post with full insurance)

VIC: $30

SA/NSW: $45

QLD: $50

WA/NT: $70

IN STOCK NOW READY TO BE SENT OUT OR PICKED UP!!!

To order please send me a PM or send an email to [email protected]

  • 2 weeks later...
mine hasnt arrived yet :P

Please send me a PM with your order details.

To get from here to Austrlia wide can take up to 6 working days.

cheers,

Greg

hey mate,

do you have a pic showing in the inlet/outlet? cheers,

also do you only sell bar and plate, or also tube and fin?

-JD

Hi, you can see more pictures of the intercoolers on our website here: http://www.gktech.com.au/products/?id=57

We only have the bar and plates at this stage.

cheers,

Greg :P

I'll just wait. I know you went too china. Not trying to cause any trouble.

I am still in China but things are running as per usual and all orders have been sent out within 24 hours of receiving payment, I don't know which day your kit was sent out because I don't know who you are.. If you could send me your information I can check it for you on our order system.

cheers,

Greg

  • 2 weeks later...
  • 2 weeks later...


  • Latest Posts

    • Uhhh if anyone sees this - I bought a BRZ years ago, on my fulls soon so back on the market for the R34!
    • Research research research, and tackle the important things first, like the rust, because as a wise old hippie and some crazy horses once said "rust never sleeps" Nothing good comes easy and fast, and nothing that comes easy and fast is typically good
    • I made an extension of the item circled above in red that is hard wired to the battery and tucks away nicely in the engine bay, could easily do the same if it in the boot, just run the extended cable out under the bonnet or boot lid, I then just stick the charger on a milk crate to get it off the ground
    • It's purpose will be to stop the regulator plug from leaking oil. As GTS said, if it seals properly, it will mainly just have the effect of slightly higher oil pressure. I'll assume tolerances/fitment in the relief valve aren't that close that the washer being missing won't let it vent at 100% capacity too.
    • I put the charger in the engine bay and run the power cord down through one of the holes in the undertray, or at the back end of the engine bay, any time I need a car to be on a charger outside. In fact, I bring the extension cord up through into the engine bay so that it's not dragging around where it could get wet, or easily unplugged.
×
×
  • Create New...