Jump to content
SAU Community

Recommended Posts

ok, so my car officially has no rev limiter, it goes all the way just past 8 grand (before i back off cos im scared she'll blow!). im 99% certain the taco is accurate as i hooked up a SnapOn diagnostic comp and it read the same. also went for a drive sunday and there doesn't appear to be a speed limiter. just wonderin if anyone has experianced this and they know why.

second thing, little while back went for a massive 1 and a half hour drive about an 1hr of hard driving and now im gettin a metal on metal sound like a scrap, periodically. sounds like its coming from the front left hand wheel. Possible break issue? i haven't experianced any lack of performance in any area since the noise started. so i got clues. any help would be great guys.

Link to comment
https://www.sau.com.au/forums/topic/113121-no-limit-and-wierd-noise/
Share on other sites

My Old R33 had a HKS F con V Pro piggy back type ECU. At one stage I removed the F Con and just ran off what I thought was a factory ECU. Anyway it turned out that that ECU had no rev limiter or speed cut either and had obviously been modifed. I'm guessing yours had been modified the same for what ever reasons.

The metal on metal noise could be brakes, could be faulty shock absorber, could be your rim scrubbing on your coil over etc ... could be anything reall.y best thing to do would pull your wheel off and check for scrape marks as metal tends to leave an obvious mark.

the metal on metal sound is you running into the guard rails because you cant handle the extra rpm and speed.

Get a clue!

hhahah

gee thanks for that i'll keep it in mind..... yeah i was thinkin maybe the turbo as well, cos when i hooked up the manual boost controller to the actuater line there was a bit of oil run. now as far as i know with my limited knowledge, having oil in the turbo might not be best sign of a healthy turbo. But then again as i said before, haven't lost any boost what so eva, gonna get the brakes done early next week and see what happens. also yeah checked the ECU its factory doesn't look like its been modified at all, is there anythin to look for?

otherwise cheers at least i know im not alone.

i had a similer sound coming from my 32 a while ago, turned out to be a very thing peice of metal on my brake pads that gently rubs on the discs basiclly lets u kno ur pads are getting low. they call em squiller pads or sumthing.

an concerning ur ecu they may have just cut the wires, i kno The wire is yellow/green with a silver trace is the speed limiter. check this website out an read a few things on there u may be able to locate the problem.

www.rb20det.com

Sounds like your brakes are prolly just getting low after the thrash. If you look thru the wheel you should be able to see the outer pad. The bit between the backing and the disc is the brake material. Normally if a turbo is going you will hear a shrill noise when you come onto boost (terrible noise). They do tens of thousands of RPM so its too fast to sound like a scraping noise.

Hope i helped.

Deren

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...