Installation Of Clear Cam Cover For Rb26dett

[J-Boy]

Hi there, i would like to put on my clear cam cover for the RB26dett, however i'm not too sure of the exact procedure...can anyone advice me? And also can anyone tell me where i can get the bolts n nuts that secure it cuz i dont seem to have them...

Thanx!

[GTRsean]

use existing fasteners to mount the cover, as it's a straight bolt in. And fit the CAS gasket from the old cover as well.

[GTRgeoff]

Do a timing check first, then write it down.

Remove the crank angle sensor, then the old cover.

Install new cover, then CAS and re-time.

Bolts can be sourced from most hardware or engineering suppliers if you don't have them. Just take it in and select as needed.

[9krpm]

I am getting mine in a few day. May be we should tee up and do this together. Where do you live in QLD Jboy?

[J-Boy]

GTRgeoff: Any idea wot kindda bolts do i need fer the clear cam cover? And the sizes as well...

Thanx!

[wrxkilla]

why dont you use the ones that come off the stock cover?

[J-Boy]

Heya mike...remember me? i met u once at toombul last year when i still had a 33 gts-t...how r u? Well ive got the original cover but it does not have the bolts, when i bought the car the cam cover was already off. Are u going fer the GTR cruise by the way?

Cheers, Jyo.

[benm]

Does the timing need to be re-configred or can the CAS just be marked, put the cover on and put the CAS back on lining up with the markings?

[J-Boy]

Got mine fitted on already...here it is.