Jump to content
SAU Community

Need Help With A Ser2 Plug

Jim

By Jim,
in Victoria

 Share

Recommended Posts

Jim Rising Star

Jim

Posted
Posted

Hey guys,

to cut a long story short i snapped a plug from my ser2 r33.

The plug in question is the one that goes into the factory fog/indicators on the front bar.

I went to nissan and orderd a so called plug but all i got was the wiring assembly for the indicaor/fog, and after saying that i needed the plug that goes into that they then told me id have to order the whole loom as they dont sell plugs that come of the loom seperatley.

Ive gone to about 5 wreckers and none of them have one, either never had 1 or only have ser1 plugs as they are different.

Its a 3 wire plug that comes off the loom, runs under the headlight to the fog/indicators.

If any1 has an old ser2 loom laying around or knows where i can find one plz let me know. will be much appreciated.

cheers ...Jim

also if you want to cut yours off and give it to me that would b great 2 :P

Link to comment
https://www.sau.com.au/forums/topic/113542-need-help-with-a-ser2-plug/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • robbo_rb180
      Returning Member

      By robbo_rb180 · Posted

      They work on really anything track related now. They do my mates r35 gtr and it's a weapon of a car.
    • robbo_rb180
      High temp brake fluid?

      By robbo_rb180 · Posted

      I use the penrite 600f in my cars and have had no issues even at Townsville v8s when I drove that but I bled fluid end of day for just in case. Good value and a about 38-40 on sale. Use castrol srf on the supercars and no need to Bleed brakes over a race weekend. Do the 1000km with no issues. Over 120 a bottle I seen at repco. A quality brake pad is always a good starting point the ebc stuff I've seen let go after 2 sessions with heavier cars. I'd be going to a decent track pad and maybe those porsche air guides on the control arm to help with some air over the rotor. Helps on 86/brz with stock callipers.  
    • Duncan
      High temp brake fluid?

      By Duncan · Posted

      yeah I've never understood that either.... And to answer an earlier question, I write the date on open bottles and throw them if more than 12 months old (which they almost always are, because I don't need to bleed them unless I'm changing lines/calipers etc in between)
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nah, the one that hit the boot was a big steel locker, around 6 foot height, 4 foot wide and 2 foot deep, empty it weighs about 15kg and had about that amount of stuff in it The photo didn't give a good representation of the actual damage, the large ding on the passenger side was about a inch deep, the one on the driver was about 1/2 inch deep, right on the curve, where the inner boot frame doesn't let you get behind it with a dolly Basically the same issue with getting behind the damage on the centre of the boot We could have filled it all with bog, but my OCD would be triggered every time I looked at it, knowing what hides beneath  As for the locker, I did get the shits with it and put it in the scap metal bin, but, I pulled it out and it is now sitting in the garage at home full of car servicing stuff, cleaning gear and random tools, it's going to pay for it's indiscretions
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Whilst I typically don't cheap out on things, if I can save some money, like $1000, on a clean straight panel, that gives me $1000 to spend on other stuff, basically free money really 🤔 🤣
×
×
  • Create New...