Jump to content
SAU Community

R34 Gt-t Left (passenger Side) Window Glass Smashed..


Recommended Posts

Recently got my coupe R34 GT-T's left (passenger side) door window glass bashed.... :) Does anyone have or know where can I get a fast replacement (including installation preferred), in Sydney area? Any other suggestions welcome. Thank you!

Edited by m-p

Ask satanic (Stan). His car recently got broken into and I'm pretty sure he had to get a new window (not sure if it was passenger or drivers side).

Or better still, wait for someone who knows an asnwer to reply ^_^

Thanks guys for all the replies.. :( I have contacted Stan, he is very nice and informative.., but as he also got the passanger door's window broken. Therefore, I am still waiting to get the confirmation from some companies like Obriens, Novus, JustJap, SSS, and Nissan (Nissan did provide a solution but it is extremely expensive and lenghty). So any other suggestions will be really appreciated. Thanks once again, :laugh:

To Abo Bob: It is the door window..

Edited by satanic

I had my drivers side smashed when people tried to break into mine got it replaced by PowerPlay. They replaced it and everything for about 250 to 300 I think. Only place that had one for an R34. No point calling Obrians they dont have them.

Edited by CWest

$250 - $300 for a full window replacement + any associated trims is an absolute steal!

I had my mate run some prices from Nissan and the door window plus trims came to about $2k to repair!!!

I have PM'd Cwest to ask whether its the smaller glass or the door glass.. Because yesterday I received an email reply from SSS which said that they have the left window glass, for $250.... I gave them a ring to confirm that they have the door window glass, and again they said they have it. Finally I went to Girraween (near Blacktown) from City, only to know that they were mistaken, the one they have is the smaller one.... :laugh: At the moment, the best price I can get is from Randwick Nissan, $1190.35 excluding installation and 2 weeks delay....

Edited by m-p

See what I mean?

Also, $250.00 for the back quarter glass is a good price considering they are about $470.00 brand new (trade price) from Nissan.

Did you see if the rear glass came with the mould? Or was it just the glass... you need to get it with the mould, as it is a sealed unit.

See what I mean?

Also, $250.00 for the back quarter glass is a good price considering they are about $470.00 brand new (trade price) from Nissan.

Did you see if the rear glass came with the mould? Or was it just the glass... you need to get it with the mould, as it is a sealed unit.

Unfortunately I didnt see the back quarter one they have as I dont need that part, so I cant tell whether or not it includes the mould..

Just thought I'd post up that my glass got re-fitted tonight... excellent job done by Mick from Unique Auto Glass! In and out of my workshop in about 1.5hours which included removal from another car and transfer into mine.

The finish is so good, you could swear I was never broken into :(

Also, for all those who think that the rear quarter glass cannot be transferred, you are wrong! Mick did it with a special tool and did it very quickly...

m-p if you need someone to do your glass, talk to Mick - 0425371057

Also you might want to call him up and talk to him about my case, then your case - apparently he's found tonnes of sources for the glass (topic of conversation tonight)

Might save yourself a dollar or two!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Interesting, I haven't read about the issue with oil getting into the speedo in the cluster before. I'll have to take more notice with mine. The speedo on my R32's when I've run factory diff and tyre size have never been accurate as far as I can remember. The non Type-M GTS-t did come with 15" 5 stud wheels and smaller brakes, but that's less than 5% of them.
    • Good to hear the condenser you picked up off my brother worked all good. Do you think there could be an issue with your AC compressor itself or the clutch on it then? I don't know a lot about them so I can't really help but keen to hear what it ends up being. Keep the build thread going man, it's nice to look back on over time.
    • This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
    • Wives never seem to find things funny. Especially when they're trying to sleep, and you've found the new funniest thing ever. I've never seen someone be able to get try and be cranky with me, while they're holding back fits of laughter... 😛   Also, I tell mine it's payback anyway. She has BiPolar. So the household can get quite emotionally wild at times 😛
    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
×
×
  • Create New...