Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

as usual, wanky americans building cars that dont go around corners or bends.

But untill i see an american car that can turn corners im not even gonna bother thinking that they have a decent car that can race.

kol, last i checked Honda is a japanese brand. not made in america.

I live where this race occured. Here is the dyno sheet for the GTR from dynopro.com. The civic that he raced is probably making 450-500whp. Civics like this one are all over the place out here. Horrible powerband for the GTR as you can see. It is HKS T51R with basically no supporting mods. Probably did not even spool while racing.

paul2xdyno9ub.gif

Edited by BlackRBS13
I live where this race occured. Here is the dyno sheet for the GTR from dynopro.com. The civic that he raced is probably making 450-500whp. Civics like this one are all over the place out here. Horrible powerband for the GTR as you can see. It is HKS T51R with basically no supporting mods. Probably did not even spool while racing.

paul2xdyno9ub.gif

That's shocking...

yes it is believe it or not!

still a nugget!

compared to a turbo that is...

Last time i checked a 13 was not too bad. That is not even hard to achieve with an eg and a bone stock K series. I dont know maybe I am preaching to the 10 second crowd but where i am from 13slooks pretty fast on the street.

I live where this race occured. Here is the dyno sheet for the GTR from dynopro.com. The civic that he raced is probably making 450-500whp. Civics like this one are all over the place out here. Horrible powerband for the GTR as you can see. It is HKS T51R with basically no supporting mods. Probably did not even spool while racing.

paul2xdyno9ub.gif

That is one terrible graph, must be one crappy tune, and a car with half its Max power with a better average tune would be able to take it easy.

Some civics sure are fast. there is quite a fwd culture in some countries where they are posting some good times. with a decent suspension setup they can corner well too.

with enough money you can get a hyundai excel to accelerate faster than a badly tuned gtr. it's all about power to weight not the badge on the car.

you look at that site and can find all sorts of cars beating machinery you wouldn't expect. ferrari's and lambo's get beaten by some cheap cars with big mods. there's even a turbo'd viper (could be twin turbo) that beats a turbo suzuki hayabusa (spelling?) where the rider of the bike admits to getting beaten. I found that hard to believe though apprently they were both trying.

it you want acceleration by a cheap car. Add a big big engine and add forced induction. Oh and take out the unwanted weight. it's a simple formula.

Edited by Smurf

Like many had said if you got the cash you can do up and bomb and whoop anyones arse whether if its gtrs or not. All you need a sh!t load of cash if money arent a thang then go for it if standing out from the crowd is your thing.

i think the sad reality is that the gtr just got smoked

some civics and the like are incredibly fast. there are a couple here in nz that look standard and run low 11's / high 10's.

sure the gtr is a great car but that doesnt automatically mean that because you own one means that your instantly fast. thats almost adopting the holden v8 drivers mentality

Jesus grow up! lol

I have a skyline and I love it but they are not the quickest car on the road and especially not anymore with all the euro cars/hatches which are putting out the same sort of stock power as us.

Be realistic about it or you risk becoming a bogan who thinks his vl is the quickes thing around hahahah

sure the gtr is a great car but that doesnt automatically mean that because you own one means that your instantly fast. thats almost adopting the holden v8 drivers mentality

Thats a really un-fair generalisation, since you dont know what every single Holden V8 driver's mentality is.

Ross80: While that does happen, think about the people who have spent alot of money and time on their VLs who arent bogans.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • who can tell me what this is and why my car talks to me? i think it's hilarious. it's on my r34 right above the drivers-side storage compartment. the characters under the wrench say "inspection". every 10 or 20 startups, a voice starts talking in japanese from some speaker in this area below the dashboard. it says a few sentences then shuts off. different from the ETC card reader voice that happens every time i start the car. I've never found the speaker, i've never been able to catch the voice and translate what it says, and i've never found a forum thread that tells me how to reset the warnings. the holes in between the symbols are NOT buttons you can press to reset the warnings. anyone else have this? has the demon lord from Hereditary infected my car?!
    • Would you ever vent this bonnet or will it be unnecessary?
    • Happy new years folks! Wishing you all a successful year of money pit ownership!  So the subframe bushes are out....   Ok, who else has done that job before??  What a C U Next Tuesday of a job that is!  Be glad to not do that again in a hurry! I think I explored every option available to chop the middle section of the bushes out, most of them unsuccessfully! I tried a holesaw, die grinder, normal drill bit, air chisel, etc, etc. The true success happened by accident when I'd decided to try a step drill I spotted on the bench on the way passed.  See, there are benefits to never cleaning up after yourself! It RIPPED through so so much better than the drill bit. It has to be the skinniest one available so its small enough to fit between the inner tube and outer casing but it made easy work of it.  First one i hammered the shit out of... New method- 20250102_185506.mp4   I did the other 5 in less time than I fluffed around with the first one. With the first couple I used the cut off saw (sawsall as the yanks love to call them) to cut a break in the outer casings. Even with that they're still a prick to hammer or air chisel out.  The last few i just went rambo with the air chisel without cutting them. I over cut one of the early ones so will hit the with the mig to fill the cut then sand it off smooth.  The carnage left over-   I've also been "nesting" ie, cleaning up my babies nursery,  ie cleaning the f**king pig sty of a shed. I've got that much shit laying around it's as cluttered as my head!  Getting things put away, in boxes, on shelves, hanging off walls, all to get some working space back again.  Hopefully that keeps me motivated....
    • AFAIK does the base map for Haltech even have the 4D compensation enabled? It's been a while but when I looked at it I remember it was actually using pure TPS as one load signal and MAP for another. Seemed workable but not ideal by any stretch. A lot of people have "make the event-itis" which leads to stuff like this happening.
    • https://www.youtube.com/watch?v=qHhWelSBppY
×
×
  • Create New...