Jump to content
SAU Community

Boost Problem....don't Know Whats Going On

improvin

By improvin,
in Engines & Forced Induction

 Share

Recommended Posts

improvin Enthusiast

improvin

Posted
Posted

hey guys i've done the searches and still don't know what s going on. i just got my turbo hi-flowed and the boost rises freely. as soon as i put the foot down it flies past 1 bar. i took the bleed valve out and left it as stock setup and it goes to .8 bar for a split second and as the revs climb so does boost to 1 bar. i've checked lines i've made sure it fitted right. if i connect the wastegate to the bleed valve and the hose off the cooler to the bleed valve and block off the third line, winded up the boost the boost just climbs like it was on stock setup, as if it wasn't there. if i hook up the wastegate to the bleed valve and T piece the hose from the cooler and the third line then connect it up to the bleed valve it just flies to 1 bar and over. does anyone know what to do i want it to be set at 12 psi and hold. please need help

improvin Enthusiast

improvin

Posted
  • Author
Posted

yeah exactly as stated by craved i did that. the boost goes to .8 bar then as the revs climb so does the boost to 1 bar. now whether i set the bleed valve to 12 psi or close it off it does the same thing. it goes to .8 bar then climbs with the revs to 1 bar

Craved Grand Master

Craved

Posted
Posted

only other thing is that the wastegate cannot allow enough gas out to allow the lower boost setting

or

the wasegate is sticking and not opening fully to allow that boost reading.

.....

what sort of supporting mods do you have?

and does it hold at 14.7 psi once it gets there?

improvin Enthusiast

improvin

Posted
  • Author
Posted

okay i've got a intercooler, full exhaust and now the turbo....still working on getting a computer.

last night i changed the wastegate to my old one and now the boost goes to .5 bar and then slowly creeps to 1 bar with the revs.

the boost doesn't just sit at 14.7 psi it goes to whatever...it just free boost...it once when to 1.5 bar

hey thanks for your info craved but still doin my head in

you think its a good idea to change the wastegate to something else

improvin Enthusiast

improvin

Posted
  • Author
Posted

well the way i've hooked it up is from the

1. cooler hose->bleed valve->wastegate = it goes to .5 bar then when the revs climb so does the boost to 1 bar

2. cooler hose T piece with the other vacuum line->bleed valve->wastegate = i get free boost

with option 1 i turn winded up the bleed valve and it doesn't do anything it's like its not even there. it just does what is above at option 1. its the same for option 2 its as if the bleed valve is not even there

rob82 Mentor

rob82

Posted
Posted
well the way i've hooked it up is from the

1. cooler hose->bleed valve->wastegate = it goes to .5 bar then when the revs climb so does the boost to 1 bar

2. cooler hose T piece with the other vacuum line->bleed valve->wastegate = i get free boost

with option 1 i turn winded up the bleed valve and it doesn't do anything it's like its not even there. it just does what is above at option 1. its the same for option 2 its as if the bleed valve is not even there

Have you try just running wastegate pressure? As in cooler hose to wastegate. If so what happens then??

chrissso Proficient

chrissso

Posted
Posted

Try wiring your wastegate wide open. Or disconect the actuator from the wastegate flap so it's wide open. (internal gate right?) Then go for a drive. See what boost you get. If you still get a bar with the wastge wide open, then your waste gate isn't big enough. I had a little problem like this when I fitted a dump pipe and an air pod filter. My guess is the extra breathability of the combined dump and air pod meant that either the wastegate was too small, or the actuator wasn't opening the wastegate enough when it was full extended.

Fixed it with a Jaycar Independant electronic boost controller.

My max PSI was about 9, so I tuned the IEBC to run 9psi the whole way through the rev range for a flat boost curve. You would have to do the same for 14.7psi

I also found that after fitting another pod filter that was more restrictive, boost would start to creep up and then fall off at the top of the range.

hope this helps...

improvin Enthusiast

improvin

Posted
  • Author
Posted

hey thanks for the reply guys, craved i've changed all the hoses before i posted it and it doesnt change same shit. i'll try what chrisso said and disconnect the actuator thanks for the info mate. kyro if you could let me know about your mate with the sr much appreciated. the hiflow was done at JPC in thomastown in melbourne

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      GTR R34 Limp Mode

      By GTSBoy · Posted

      Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • steven7270
      GTR R34 Limp Mode

      By steven7270 · Posted

      So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Dose Pipe Sutututu
      SAUNSW - Cruise - Albion Park Aviation Museum - 9th August

      By Dose Pipe Sutututu · Posted

      Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • PranK
      Rusty roof repair

      By PranK · Posted

      Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...