Jump to content
SAU Community

Recommended Posts

With turbo engines the oil is "abused" more, as it is used as a cooling fluid, thus is subjected to greater heat, which can break down the oil faster.

I have never owned a new turbo car so i have never seen the owners manual, but i would be extremely surprised is any manufacturer would recommend service intervals of less than 10,000km. At the end of the day they are only concerned about the car lasting for the duration of the "manufacturer's warrenty".

I get mine serviced at every 10,000kms but i dont have any mods or anything. If i had some mods i'd get it serviced at every 5,000km.

Theres a decal under the bonnet that tells u most things like when u should change the air filter, oil and filter, fuel filter and what the gap size in the spark plugs should be.

I'm not saying you should do exactly what it says but use it as a guide line

Well i check my oil regulary, and will stick with 10,000 service intervals (that includes oil filter) and looking at the oil in there at the moment been in about 4000 k's and looks not to bad to me. Definietly not like new but not like soot either.

I am constantly amazed that people think 10-15 year old cars have done less then 100,000 km.

Dont you mean less than 30,000 ? Plenty 10 yo cars in Japan with less than 100,000 but they dont come here, we mostly get higher k's cars here .

yeah plenty with their Speedo’s wound back anyway.

Im sure truely by now if you have/are going to import a car with low kms you would suspect that its speedo's might have been tampered with. Mostly people just turn a blindeye or ignore the speedo's readings. There are other ways to check the condition of the car like the condition of its interior (low kms+worn seats, steering wheel etc = speedo's been tampared with). You can also check the engine of the car (find a sticker where it state when the timing belt has been changed etc). Like most people have said in the above posts its not that hard to change electronic odometers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've sent JaseR33 a private message in the hope he gets an email and contacts you
    • I have seen a case where the starter motor shorting against the casing caused a massive voltage drop + so much EMI that it caused all the sensors to spew garbage data at the ECU. Test the battery to make sure it has acceptable CCA/capacity first, I have gotten "brand new" batteries before that couldn't even power a 10W light bulb without dying probably because it sat in a warehouse too long without being charged. Only easy way to diagnose this 100% is put an oscilloscope on the battery and also look at key sensors to see if there's any clues.
    • There's a bunch of smaller shops that don't quite attract Singer money but are still hiring from that same pool of labor. Those are the body shops that you go to when you can't afford a Singer, but your old Porsche needs some serious bodywork. You can't exactly take those cars to the usual insurance body shops. When I say restomod, I mean they'll do something other than 100% OEM/OEM-equivalent aftermarket parts R&R. In the Porsche world this would be stuff like taking a 50k 964, doing a bunch of deferred maintenance/unwinding the nightmares the previous owners did to the car because a lot of people that own these cars tended to be penny wise, pound foolish types, then maybe some relatively simple off the shelf modifications to things like suspension, transmission, engine, headlights, etc. and you've spent 130k USD. When even the worst houses in the poor neighborhoods are worth 1M USD and the nice houses in wealthy neighborhoods are worth 3-10M USD suddenly 130k spent on a 50k car seems cheap.
    • Hoping to get a few ideas to help troubleshoot this issue, I'll try to keep it short.  A mate popped the motor in his 2018 LDV T60 with the 2.8 turbo diesel motor. He swapped it and I was his phone a friend when he got stuck.  The new motor is in, however it won't fire. The battery is literally brand new, when you crank it the volts very quickly (say 2 seconds of cranking) drop to 8 volts and the engine stops turning over. Watching the belts, I'd say they move about 5cm before coming to a stop. We put a booster pack on, no change.  The only potential issue I'm aware of is, when we pulled the motor the grounding strap was still attached. The strap copped a thrashing before we realised what was going on. It looks okay-ish but it's going to be replaced to rule it out.  The main challenge is, I wasn't there for 90% of the work. This is his first time doing any major work on a car and he was learning as he was going. He thinks everything has been put back together properly, however I'm not entirely confident that this is the case.  It would be good to get some ideas about what else to check. The car isn't spitting any codes so that doesn't help.  I've attached a photo, because why not lol.   
    • I mean an N1 came with a minimal paint thickness compared to dealer models. It’s probably had a ton of vinyls and stuff possible a race paintjob or two over the years. you don’t buy an N1 for its stunning good looks or comfort 🤣 you buy it to send it and measure how much air you can get on the hill at Bathurst
×
×
  • Create New...