Jump to content
SAU Community

Recommended Posts

I have an RB30 non-turbo with extractors, auto gearbox, auto ecu and tailshaft (wont separate!) for sale, engine has 274,XXXkms on it, but runs perfectly, doesnt leak any oil, etc etc.

Its from a series II VL Berlina, so the bottom end is the same as the turbo model.

Wont be available until about May 23rd/24th.... definitly within that week.

Whatever else comes out of my car should be included (if wanted)

$600.

$270 - engine

$100 - gearbox

$150 - extractors

$30 - ecu

$50 - tailshaft

Everything is in good condition, nothing wrong with them, the reason for selling is an engine conversion. (only thing that needs replacing is the pcv valve hose thing, with the yellow tape around it. It has a hole in it. They're only ~$10, if that)

If you are interested in buying and want to see the engine running, currently in my VL, email me at [email protected]

I am in CANBERRA.

(buyer will have to pick the stuff up, or arrange delivery at own expense)

2183329a.jpg

2183329b.jpg

2183329c.jpg

2183329e.jpg

Edited by b1ancardi
Link to comment
https://www.sau.com.au/forums/topic/113977-fs-rb30-other-parts/
Share on other sites

  • 1 month later...

I would like to purchase the whole thing if your willing to ship. Im located in Charlotte, NC, USA. It will need to be in a crate, but I will pay for that as well. I can arange shipping to pick it up from you. Please let me know if you will consider this.

Thanks,

Mark Boles

From "way over there!" :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is there a significant price difference between the Evo/gtr/350z brembos vs the F50? Looks amazing.
    • I was actually being a tightarse at the time LOL... My OCD is tickling me into running a 2nd 8AN Teflon hose all the way down and removing the 2x OEM hardlines. My other side of my brain is telling me to run 2x hardlines front to back (also acts as a fuel cooler, so win win).
    • As I mentioned in an earlier post, I had some trouble with the Silvia's brakes dragging back in 2023. I managed to sort it out then, but the same problem came back to bite me late last year. Just take a look at the picture – I had a feeling the handbrake was acting up again, and I was right. Anyway, I'd been wanting to upgrade to bigger brakes for a while. Not that the Silvia's brakes were bad, but it was more of a "want" than a "need", you know? It was funny, though – at the time, I couldn't find any Evo Brembos, 350Z Brembos, or GTR Brembos for a decent price (of course, tons of them popped up online after I already bought my kit!). I ended up going with an F50 Brembo kit, which came with adapters, brake lines, 330mm rotors, and top hats. The F50 Brembo caliper was used in a few other cars too, like the FPV. I also decided this was the perfect opportunity to ditch the Silvia's ridiculous rear brakes and that awful handbrake (some of you were definitely right about that!). I picked up some R33 calipers and all the necessary bits – rear drums, backing plates, and new hardware to refurbish the calipers. Of course, it wouldn't be a project without a few hiccups. Turns out the brake master cylinder was playing up and basically (to put it simply) keeping the brakes engaged. I had it overhauled, and after some adjustments, everything was working again. The whole process took a while, as you can imagine. To top it off, the front right wheel bearings were shot and needed replacing too. This is a rare occasion where I'm posting an update while it's all still fresh! These pictures were taken just this afternoon.
    • I was just going to say that it's good to see you picking up the pace again. Hope the surgery goes well. More downtime just means more time to come up with new ways of digging a deeper rabbithole  
    • How do they compare in size? I have the Yaris coil packs in mine and they work fine. But they are either bigger or sit differently so the engine cover doesn't fit anymore. Not the end of the world but not great either. Do the R35 ones sit flush?
×
×
  • Create New...