Jump to content
SAU Community

Recommended Posts

Hey all, I was just wondering what the deal is with going to get permits for mods & taking the car through the pits. I've only been pulled over twice & only the first led to a vehicle check, but I would like to save as much hassle as possible down the track.

One concern I have though is that when they check it out if there is something they won't pass/permit, what happens then? I haven't got a yellow to get off, but I want to get permits for as much of the things as I can so it shows I am doing the right thing. I have a lot of mods (350rwhp, use your imagination ;p ), and I haven't got a permit for any of them. I want to get permits because if I got a unproffessional cop he could write out a list as long as my arm & if I ended up having to take it back to near stock that would really suck.

Can anyone shed some light on this for me? A few things about my car though, the exhaust is turbo back but pretty quiet considering it all, the rims are 17" which are legal, a/m steering wheel but I'm pretty sure it's still legal size & boost gauge on the a pillar but at the bottom so it's below eye level. These aren't too much to worry about & all should go fine & permitted (exhaust excepted unless I get really lucky), but is there much difficulty in things like high mounted turbo's, or any piping or anything like that?

I also have an atmospheric bov, but it does take about 8psi to activate (I run 12) & when it does it isn't even really loud. It sounds serious, not ricey :P. It's welded to the pipe & is pointed into the bay, not facing up. Can you get them passed or not, or can anyone see any trouble for me?

Any help is appreciated, cheers, Nathan

I've never known them to put a sticker on a car that was brought in for a permit.

Especially as you are trying to do the right thing.

They'll either give you a permit or not.

I don't think you will need a permit for a turbo unless it's a highmount or something.

In the stock position one turbo looks like the next so they would most likely not issue a permit for it

Cant answer the turbo one, but I got permits for strut braces, intercooler and piping, pod, manifold (stainless), guages, bride seats, steering wheel, hand brake lever, shift knob, etc

I also have 17" wheels (17x10 and 17x9) coilovers and cat back - the guy said they dont give permits for them as "they are either legal or they are not", but in total I got permits for around 10 different things. The car had just been through a full inspection to transfer rego - I just paid $37.50, went back to them and they wrote the permits up on the spot.

  • 1 month later...

From what i heard from a friend who went to welshpool to ask, they will never issue u a yellow sticker to get a permit as they know u're doing the right thing. But i always wondered if the car is like really bad, would they let u drive it home still?

I've got permits for my hks sqv and exhaust. Need to get the rest of the permits soon.

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not wrong but 5W30 at 100C is like 10 cSt vs 25 cSt for 10W60. If we think in terms of viscosity margin 10W60 will probably still be ok at 130C but 5W30 is probably too little. It's absolutely shocking how hot the oil gets in something like a stock FL5 from only ~3 minutes of use on the Nordschleife. I would not risk taking a car like that to anything remotely intense without a ton of work done for cooling. Heat shielding on the manifold/turbo/downpipe, oil coolers, etc. 
    • I think the concept is highlighting the various scenarios where thicker oil helps, and thicker oil potentially doesn't help and only generates heat and costs power, in turn for safety which isn't actually any safer (unless you're going real hot). If anything this does highlight why throwing Castrol 10w-60 for your track days is always a solid, safe bet. 
    • Jason should have shown a real viscosity vs temp chart. All the grades have very little viscosity difference at full operating temperature.
    • Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
×
×
  • Create New...