Jump to content
SAU Community

Recommended Posts

hehehe, I cut the shifter shorter in my previous car.

A hacksaw, 30mins of sweat and I finally cut through it.

Bought an aftermarket shift-knob and it clamped right on. No Probs.

If you wanna try it, do it, just don't whinge to us if the hacksaw runs away and you "bling bling" half your dashboard....

Link to comment
https://www.sau.com.au/forums/topic/11436-shorten-shifter/#findComment-194888
Share on other sites

Erg, having bought a car once that had a shortened shifter, yeach, never again, unless you get a propper short shift kit, which uses a normal length gear stick, it just changes the pivot point, you'll be regretting it, the short gearstick looks cute but i found it a pain on a regular basis when changing gears having to reach for a tiny stick which didn't give the right leverage

Link to comment
https://www.sau.com.au/forums/topic/11436-shorten-shifter/#findComment-195485
Share on other sites

i recommend getting a quick/short shift kit, it gives the car a much better feel as the throw between gears is very minimal. chopping the gear stick is the dodgy brothers way.

god knows how long my box will last with the quick shifter. :P

does it serious munt the synchro's slamming it into gear that fast?

Shaun

Link to comment
https://www.sau.com.au/forums/topic/11436-shorten-shifter/#findComment-195898
Share on other sites

you guys say the throw is wrong when cut down, and leverage is bad.......:P you guys need to go to the gym or something, cause I cut mine down 10mm and the stick is so much better and didn't cost a thing! ..............worth doing if you don't like it then buy a short shifter:D :);)

Link to comment
https://www.sau.com.au/forums/topic/11436-shorten-shifter/#findComment-197548
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...