Jump to content
SAU Community

Recommended Posts

actually just use your mouth, yelled out the noise and you will be sweet!!

BOV and pods are the latest generation of wanky factors nowadays in this car scene, just remember BOVs dont do shit! i have a factory one on mine and it actually works better. so what u want the f**ken noise for?

oii oii, I'm getting trashing of my life, gone doing assignment..

Yes of course I meant Atmospheric Blow off Valve (BOV). The plumb back makes next to no noise at all and in this context, "sound" is the key.

Atmospheric BOV does increase fuel consumption just do a search within this forum itself. They also causes the car to stall if set incorrectly.

If GTT factory claimed flywheel hp is 206. Then my car must be smoking weed to be able to achieve 200hp at the wheels, stock. While at it, what is the factory rated power for GTR? 206 as well isn't it? This is because of a gentlemen’s agreement between Jap cars manufacturer (Wikipedia, 2006)

Also 206 figure at the flywheel is not in the unit of Hp...It is actually 206KW at the flywheel or 280hp.

“A (now-defunct) agreement between the major Japanese auto manufacturers to limit the maximum advertised engine power of their cars to 280 PS (206 kW or 276 hp).” Wikipedia,2006

Quoting myself “also apparently stock GTT suppose to have abt 206hp”

“Apparently” means it seems that or seemingly (Cambridge, 2006). I’ll explain further: “meaning I am not sure”

A comparison between my Dyno result and rumours that have been going around (206hp at the wheel, not flywheel!!) cannot be established as a definite implication

If everyone choses to be so specific a plumb back valve is not a blow off valve...it's termed a bypass valve (Hide, 2006)

“Blow-off valve (BOV) / Dump Valve / Vent valve

This valve type features an adjustable spring design (spring in compression) to keep the valve closed under idle, cruise and boost conditions (eg 0.5 bar). Only at sudden throttle lift-off (eg 0.8 bar) does the valve momentarily open to vent / dump the pressurised air directly to atmosphere through a specially designed orifice (and wooshtssh).

Compressor bypass valve (CBV)

In the CBV case, pressurised air is returned to the turbo compressor inlet for reuse, instead of being dumped to atmosphere. The bypass valve is open under normal low-load engine running conditions, and closes firmly when positive (boost) pressure is present in the inlet manifold (or plenum chamber). When on-boost and changing gear (throttle lift-off), a sudden lower pressure condition is created in the manifold and the valve is pulled open again, directing pressurised air back to the turbo inlet.” (Hide,2006)

Last note:

Do your own research before believing in whatever people type in forums.

Jesus…there I’ll go back to my assignment

Reference

Wikipedia the free encyclopedia: Nissan Skyline, 2006. Retrieved May 3rd, 2006, from, http://en.wikipedia.org/wiki/Nissan_skyline

Cambridge Dictionary Online: Apparently, 2006. Retrieved May 3rd,2006, from, http://dictionary.cambridge.org/define.asp...=3513&dict=CALD

Hide, A. Compressor bypass valve (CBV) / Turbo Blow off valve (BOV) / Dump valve / Vent valve, 2003. Retrieved May 3rd, 2006, from, http://wwwrsphysse.anu.edu.au/~amh110/Tech...w_off_valve.htm

Wikipedia the free encyclopedia: Gentleme’s agreement, 2006. Retrieved May 3rd, 2006, from, http://en.wikipedia.org/wiki/Gentlemen's_agreement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome!  How long have you had it? And what colour is it?
    • "CAD" version 1.0 It will have a 15mm lip around the top for 6 × 5 or 6mm nutserts and fixtures (two on each of the three straight edges), and some pinch weld on any exposed edges, it has three mounting points, one of the power steering reservoir bolts, and two on the rad support, my 120mm hole saw will make short work of hole for the silicone joiner, with ample room for some pinch weld  I've also got enough Carbuilders "peel and stick" heat shield to cover the outside of it at the coolant expansion tank and on the engine side, as pictured, and internally on the lid and where the fuse box is, I've also got some thin, about 3mm, black 3M single sided sticky foam stuff that was left over after sealing some door drafts at home to help seal the lid As for the shape, it "sort of" matches the shape of the fuse box, so shouldn't look to "out of place" The lower area and hole for the intake will need pinch weld with a balloon on it to fully seal the hole and bottom of it, that will happen after it has been fabricated so I know exactly what size is required  Filter service has been trialed,  and so far it was a simple process  Just need to get some alloy, and then head into work to use the guillotine and break press in the workshop Hopefully it should be sorted in a week or two Guestimated outlay will be under a $50 for the stuff I don't have on hand (alloy, 6mm nutserts, the pinch weld, and wrinkle paint) Disclaimer: That's what the "voices in my head" are telling me how the filter box should end up getting done......lets see if they know what they are talking about  
    • Have been polishing up the trailer rims as they had been sitting in the shed for a few years and are really in need of some love. This was after a couple of passes with chrome polish - coming up quite well ✅ .
    • Welcome aboard! Is your Skyline auto or manual? I'm assuming manual. Does it have any mods done yet?
    • Hey mate, the brown and grey plugs would usually go to the TPS, brown one goes on the bottom connector and grey is the top but isn't used unless the car is auto, your TPS looks different to mine though I've got a series 2 engine.
×
×
  • Create New...