Jump to content
SAU Community

Recommended Posts

actually just use your mouth, yelled out the noise and you will be sweet!!

BOV and pods are the latest generation of wanky factors nowadays in this car scene, just remember BOVs dont do shit! i have a factory one on mine and it actually works better. so what u want the f**ken noise for?

oii oii, I'm getting trashing of my life, gone doing assignment..

Yes of course I meant Atmospheric Blow off Valve (BOV). The plumb back makes next to no noise at all and in this context, "sound" is the key.

Atmospheric BOV does increase fuel consumption just do a search within this forum itself. They also causes the car to stall if set incorrectly.

If GTT factory claimed flywheel hp is 206. Then my car must be smoking weed to be able to achieve 200hp at the wheels, stock. While at it, what is the factory rated power for GTR? 206 as well isn't it? This is because of a gentlemen’s agreement between Jap cars manufacturer (Wikipedia, 2006)

Also 206 figure at the flywheel is not in the unit of Hp...It is actually 206KW at the flywheel or 280hp.

“A (now-defunct) agreement between the major Japanese auto manufacturers to limit the maximum advertised engine power of their cars to 280 PS (206 kW or 276 hp).” Wikipedia,2006

Quoting myself “also apparently stock GTT suppose to have abt 206hp”

“Apparently” means it seems that or seemingly (Cambridge, 2006). I’ll explain further: “meaning I am not sure”

A comparison between my Dyno result and rumours that have been going around (206hp at the wheel, not flywheel!!) cannot be established as a definite implication

If everyone choses to be so specific a plumb back valve is not a blow off valve...it's termed a bypass valve (Hide, 2006)

“Blow-off valve (BOV) / Dump Valve / Vent valve

This valve type features an adjustable spring design (spring in compression) to keep the valve closed under idle, cruise and boost conditions (eg 0.5 bar). Only at sudden throttle lift-off (eg 0.8 bar) does the valve momentarily open to vent / dump the pressurised air directly to atmosphere through a specially designed orifice (and wooshtssh).

Compressor bypass valve (CBV)

In the CBV case, pressurised air is returned to the turbo compressor inlet for reuse, instead of being dumped to atmosphere. The bypass valve is open under normal low-load engine running conditions, and closes firmly when positive (boost) pressure is present in the inlet manifold (or plenum chamber). When on-boost and changing gear (throttle lift-off), a sudden lower pressure condition is created in the manifold and the valve is pulled open again, directing pressurised air back to the turbo inlet.” (Hide,2006)

Last note:

Do your own research before believing in whatever people type in forums.

Jesus…there I’ll go back to my assignment

Reference

Wikipedia the free encyclopedia: Nissan Skyline, 2006. Retrieved May 3rd, 2006, from, http://en.wikipedia.org/wiki/Nissan_skyline

Cambridge Dictionary Online: Apparently, 2006. Retrieved May 3rd,2006, from, http://dictionary.cambridge.org/define.asp...=3513&dict=CALD

Hide, A. Compressor bypass valve (CBV) / Turbo Blow off valve (BOV) / Dump valve / Vent valve, 2003. Retrieved May 3rd, 2006, from, http://wwwrsphysse.anu.edu.au/~amh110/Tech...w_off_valve.htm

Wikipedia the free encyclopedia: Gentleme’s agreement, 2006. Retrieved May 3rd, 2006, from, http://en.wikipedia.org/wiki/Gentlemen's_agreement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
    • STOP GOOGLING FAB9 MAKE BORG WARNER EFR KITS FOR THE NC. THEY PACKAGE AN EFR 6758. DO NOTHING ELSE. CAPS INTENTIONAL. THE BEST RESPONSIVE SETUP EXISTS FOR YOUR CAR, AND HAS BEEN PROVEN FOR QUITE SOME TIME NOW. IN B4 "BUT I WANT EVEN MORE RESPONSE, IN A SIMPLER, MORE RELIABLE PACKAGE" WHICH IS A LS.
×
×
  • Create New...