Jump to content
SAU Community

Recommended Posts

Thats ok, if you still cant find it the mounting points are on the rear wishbones by memmory. Its hard to picture where is would go because the swaybar link is a stright cylindrical piece of metal inlike most other links, you need nuts either side that go through the wishbone in the rear . But if you get whiteline they change the design and you need to buy there links to make it suit, its a lot better than the stock rear sway bar, because the design changes the whole way the sway bar looks and fits.

  • 1 month later...

if your after info on GTS4 box check this:

http://www.skylinesaustralia.com/forums/topic/370991-r33-gts4-na-box-to-handle-250kwatw/page__p__5924403__fromsearch__1#entry5924403

will give you some solid info ;)

gtst, gtr, stagea, gts4 all have the same subframe so most bits n pieces are interchangeble.

1st 2nd is definately shorter, 3rd is slighty shorter and 4th and 5th pretty much same, feels absolutely fine apart from the common weak synchro issues but soon as i used some redline lw sp that fixed it up pretty good.

hey guys, rather then starting new thread...

Im just in the process of putting r33 gts4 runing gear into a gtst shell. I know its easier to start off with RWD components, but I already have these in the shed, so...

Ive just removed the RWD sump and started to remove the gts4 sump, the bolts are much largeron gts4 ? Can i just bolt up the rwd sump to the awd block and which bolts ?

Also, if i just drop the front driveshaft, can i drive the car aroud safely in RWD ?

Can I use the gtst tailshaft and diff ?

Anything else to look out for ?

Help greatly appreciated. thanks guys

no one has a clue because no one has done it......main reason because its pointless....

Thanks for your input :)

sumps seem to line up perfectly, just took them off, havent had a chance to bolt it up yet :)

Now just need to confirm if i can run the gearbox with the front driveshaft dropped off, without any issues ?

Edited by KISIN

I have rebuilt GTS-4's engines, diffs, gearboxes BLA BLA and how did you get them to line up????????????????

They are no where near the same shape as the block? The GTS-4\GTR block petrudes out where the diff is and it has 4 or 5 different styles bolts where the RWD is just rectangle and uses 30 of the same bolts.......

They will fit but they are not the same 270CC like the NA ones they are about 370CC

  • 1 month later...
  • 1 year later...

I'm thinking of getting a gts4 , what's some basic/cheap things that I could do to improve it's performance ??

Full service of everything, wider/better tyres, suspension, brakes.

Build driving experience, get full license.

Sell it and get whatever you want.

Full service of everything, wider/better tyres, suspension, brakes.

Build driving experience, get full license.

Sell it and get whatever you want.

If by that stage you've done all that stuff and had it for three years and still want to sell it... Well sir you obviously don't love your car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
×
×
  • Create New...