Jump to content
SAU Community

Recommended Posts

Now that sounds better. I fill my car up to the maximum limit it can hold. (65L), i drive it all the way untill it literally hits the end of the empty line, i go to fill it up, it only takes about 35-40L. Its still got around 20L left of petrol yet it says its empty. The light doesnt come up or anything, im just too scared to risk it incase. Ive heard this is pretty common in skylines, anyone know? Any possible fix to this if any?

It's pretty common on most cars, I think it's a design thing, to stop people running out of petrol. The common thing to do is fill it up when it gets low. Why do you want to run the tank dry? Low fuel warning light usually comes on when the tank has ~10L of petrol left, but this varies with cars.

I've put a new fuel sender in the tank and it hardly changed. The light doesn't come on until the needle goes just past the 'E' it's about 10L left when your needle drops about 1mm under the 'E' on the factory gauge.
Best only do that if you need to change a fuel pump.

You won't find a car (with a working fuel gauge) that doesn't have the fuel light come on with about 10l left in the tank. This is so when the light comes on you have enough fuel to get to a servo. No point having the low warning light come on and the having it run out of fuel 5 seconds later.

You won't find a car (with a working fuel gauge) that doesn't have the fuel light come on with about 10l left in the tank. This is so when the light comes on you have enough fuel to get to a servo. No point having the low warning light come on and the having it run out of fuel 5 seconds later.

I know, and i agree it would be really stupid for it to come on with only 5 seconds left of fuel. I just find it odd that it says im on empty, yet i fill it up and it only takes about 40L of petrol, thats still 25L of petrol left. One day i drove it around for a couple days when the needle was on empty. Eventually i went to fill up because i thought the fuel light would of turned on by now, so i thought maybe my car doesnt have one. It only took 40L, i was thinking it was going to take atleast 55L of petrol before being completely full again. So thats why im thinking i need a new fuel sender but thought id better ask the people on these forums before i waste money on something not needed. Im not complaining that much though, better safe then sorry, just that fuel reading is very misleading.

Now that i know the fuel warning light comes on with 10L of petrol left, im going to top it all the way up and drive it until the light comes on and see how much km i get out of 55L of petrol. I guess im hoping for atleast 450km out of 55L.

Edited by Gw2
  • 2 weeks later...

There is a few things you can do. First, reset your odometer everytime you fill up, then just run it till the needle is pretty much spot on the empty line. Then take note how many litres it takes to fill it. Then you can work out your average economy and then work out how much further you could drive based off how much is generally left in the tank when the needle is on the empty line. This method will give you an accurate way to calculate how much fuel you've used and how much is left down to a few litres. Much more accurately than any fuel gauge as they can work in funny ways depending on tank shape. For example, I've had 2 cars where I could drive close to 150kms before the gauge moved from full, yet my current car will be down to 3/4 after that distance, but yet the last 1/4 (from 1/4 to the empty line) I can do close to 300kms.

But I don't see what the problem is really. Just fill up when you want/need to. It makes difference to whether you fill up with 20l left or 10l left. Your economy will be the same, and in the long run it still costs the same.

Yeah, plus 4cyl rego is cheaper than 6cyl rego. I work between 4 and 6 days a week and drive about 125km (round trip) to and from work everyday. The Commodore got about 8.8l/100kms, the mirage gets just over 6l/100kms (best I've gotten was 5.7l/100kms).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Man that dinner was such a long time ago....2010! I would only replace the rubber coolant lines with silicone these days; cheap, readily available and will last for ever. You will need new hose clamps though eg https://justjap.com/products/cooling-pro-silicone-engine-heater-hose-set-black-nissan-r32-gtr-rb26dett
    • I wouldn't look too hard at what they did with the R32 GTR in endurance racing in Australia... Lots of things weren't actually available from the factory in the way those cars ran them... Japan also followed what Fred Gibson was doing here with some of there endurance cars in Japan... Australia is also the reason for things like the Brembo brakes, and the change in the gearbox... And quite a few other tricks they used to pull. There's a few other SAU peeps still on these forums that will have heard the stories direct from Alan Heaphy, Fred Gibson, and Jim Richards when we were lucky enough to have a great dinner with them
    • For all the talk of "these parts are junk" I generally recommend OEM because it's really not as bad as claimed. I have never seen or heard of a case like the N63 where the oil returns completely clog with coked oil for example in ~10 years or less. Would it be nice if it were a straighter path? I guess, but most modern cars use a scavenge pump instead of a pure gravity return. Also the factory lines that would be relatively simple to convert to braided are generally speaking hardlines from the factory. I would consider braided line to be a regression, not an improvement. It's also been engineered such that all the hardlines have appropriate strain relief where needed. There's absolutely room for improvement, for example the HKS advantage heritage intake piping shows just how much can be done to make the turbos fight each other less in OEM twin turbo configuration and reduce compressor surge but it's rarely a simple/straightforward process. I recommend looking at what the group A/N1 cars did, generally speaking the changes they made were necessary and proven in endurance racing.
    • Yes, multi relays needed, and possibly a diode. I'm not actually going to think about it though.
×
×
  • Create New...