Jump to content
SAU Community

Lock Nuts

philta

By philta,
in Western Australia

 Share

Recommended Posts

philta Community Regular

philta

Posted
Posted (edited)

ok, need to change rotors so i decided to do it myself to save some $$$ and learn something (not that i didnt know how already)

first prob i ran into was taking wheel off sure enough. but they were bolted pretty hard soo i got out a long lever arm and try to turn it (NO I DID NOT STAND ON IT) first nut cracked on me, so i went hunting around and cant find anything with a key as long as the original one to reach my dish rims. found a single odd one at mr mag after 1.5hrs of driving around places. and 25 bux down hoping the original key would fit into my new set but no.

come back got all nuts off but 3, and the last three of them f**KED up on me again!!

COULD ANY!!! PLEASE help me on where to find 12mm /1.25mm nissan lock nuts such as the ones pictured.

PLEASE!!!! with long key so i can put the wheel on.

post-17292-1145698933.jpg

post-17292-1145698947.jpg

post-17292-1145698958.jpg

Edited by philta
Link to comment
https://www.sau.com.au/forums/topic/114539-lock-nuts/
Share on other sites
Dizmo Enthusiast

Dizmo

Posted
Posted

Why dont u try to take the last 3 off.?

One way that i have got rusted locknuts off is to drill say a 6mm hole in the centre. Buy ur self a lefthand thread tap and tap a thred into the lock nut. buy some high tensile steel bolts and screw them in. attach a socket wreng or level bar to the head of the bolt. When u apply torque to the bolt it wont undo because they are trying to tighten. Be careful though not to drill into the wheel stud. Then buy urself some new nuts and 1 set of descent locknuts.

ive done it works even on rusted locknuts and it works.

C how u go if not then u might be able to buy soem of ebay or somewhere in japan still might sell them.

Link to comment
https://www.sau.com.au/forums/topic/114539-lock-nuts/#findComment-2110108
Share on other sites
philta Community Regular

philta

Posted
  • Author
Posted (edited)

ive tried to take the last 3 off, but since its "stretched" i ran the key too, i dont want to wear the teeth out on my key since i got another 8 nuts at teh back to take off, so for now ill take it to a tyre place so see if they can take it off rather than buying more shit just to take of the nuts. ill look for ones with a long key, then ill just change all 16 of them.

thanks for teh suggestion, that will be my last resort to getting them off, does any1 knows any store that deal with these japanese lock nuts??

Edited by philta
Link to comment
https://www.sau.com.au/forums/topic/114539-lock-nuts/#findComment-2110135
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Bwagz
      Engine model

      By Bwagz · Posted

      Thanks for that, hadn’t used my brain enough to think about that. 
    • MBS206
      R33 GTR running -9 with no tune

      By MBS206 · Posted

      Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Piggaz
      Garrett G Series

      By Piggaz · Posted

      Any G40/1000 or G40/1250 results out there?  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...