Jump to content
SAU Community

Help Need Parts

neostagea

By neostagea,
in Four Door Family & Wagoneers

 Share

Recommended Posts

neostagea Enthusiast

neostagea

Posted
Posted

can any please help me out here

i am in need of a left headlight, parker and blinker from in the front bar and possibly a new front bar.

i have shown interest in the lights that familka gtr has but i need to get prices from more than 1 source for the parts and i have been given the ok to see if anyone on here can help me. if you could please pm me so we don't get into any conflicts on pricing people may want to sell their parts for that would be great.

attached is a pic of the damage to the car.

if you want to know the dumb driver of the ford thought he had the right of way cause he had a green light but was turning right across my lane of traffic (he must have forgot about the give way rule :D dumb shit) and it could have been worse cause he may not have had insurance but just car are going to cover the majority of the cost if he wasn't insured which i think is awesome.

Any help will be greatly appreciated. Thanks in advance guys and girls

post-24862-1145854039.jpgpost-24862-1145854277.jpg

Link to comment
https://www.sau.com.au/forums/topic/114745-help-need-parts/
Share on other sites
Terminal Grand Master

Terminal

Posted
Posted

GTR Conversion time!

It sucks dude. i'm so paranoid about people hitting me like that because i know how much of a pain in the butt it is to get parts. have your tried just jap? they have stageas sometimes in their yard.

Link to comment
https://www.sau.com.au/forums/topic/114745-help-need-parts/#findComment-2112937
Share on other sites
neostagea Enthusiast

neostagea

Posted
  • Author
Posted

if there was a bit more damage i would be able to get it done but the missus wont allow the gtr conversion when there was so little damage. damn that. should have drove it into a brick wall or something to make it worth it. yeah i have sent just jap an email to see what they can get for me.

but i must say it held up quite well for the impact cause it spun the other guy about 90 degs when i tagged his rear panel. but hey i would say served him right but cause he had a pile of crap XF falcon ute (which is patched all over in matt black) it barley made a mark on him.

Link to comment
https://www.sau.com.au/forums/topic/114745-help-need-parts/#findComment-2112971
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Komdotkom
      High temp brake fluid?

      By Komdotkom 路 Posted

      Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Duncan
      First/Second Post

      By Duncan 路 Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice 路 Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice 路 Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer 路 Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
脳
脳
  • Create New...