Jump to content
SAU Community

Recommended Posts

Well took my car for a drive tonight and it was feeling rather slow, so i gave it a bit of gas and all of a sudden i get heaps of popping and ratling out the exhaust,im guessing its missing??? It coffs and popps from about 4000rpm right up to the rev limiter, and it feels very very slow, the car has never had a miss since ive owned it (about a year and a half).My mods are 3"exhaust,intercooler,pod and gtr fuel pump, i installed the gtr fuel pump about 3weeks ago and the car has never missed a beat untill tonight , ive taking out all the plugs and they all seem fine (there ngk iridiums, about a year old) they are a little bit brown tho, so what else can i check??:(

The car was also boosting very high when it was missing, about 0.8-0.9bar (it normally holds 0.7bar right to redline)

Cheers

Link to comment
https://www.sau.com.au/forums/topic/114808-missing-all-of-a-sudden/
Share on other sites

Im running ngk iridium plugs that are gapped to 0.8 (i bought them like that brand new), i didnt raise the boost or anything (i dont have a boost controller) but the boost spiked to 0.8-09bar (boost is always at 0.7bar right to redline) only when it was missfiring, all the vacuum hose and intercooler pipes/joiners seem fine

It seem like the usual missfiring issues.

Was it a cold night compared to when u normally drive? I've found boost does go up in colder weather. Turn boost down to the usual 0.7 bar and see if it does it, if it doesn't missfire on 0.7bar then it sounds like a usual spark plug/coils missfire. I had iridiums (that were mega worn though) and mine used to missfire like mad at not much more than stock boost. I changed to normal copper NGK's at 0.8mm and the miss totally disappeared (apart from a slight miss at idle, which is another story).

Fixxxer :)

Ok,put all the coils (all covered and sealed in silicon) back into the car today after work and went for a drive at about 6pm, the car still had the exact same problem and was very very surgey,but it "seemed" like it wasnt popping and farting as much as before,so i drove back home very dissapointed and decided to reset my ecu,took the car for a bit of a thrash and the problem had completly dissapered ,what the hell is wrong with my car???

Im stumped lol

Took the car for a drive at 9pm and it was driving awsome for about 20mins then everything turned to ****,started popping and farting again,it even does it when im on about 3/4 throttle (and it feels really slow and non responsive even when im driving slow around town), so i came home and reset the ecu once again which fixed the problem completly,i guess its going start popping and farting tommorow just to piss me off lol.IMO i think its something to do with the ecu (althought that dosent explain why it was going fine for 3weeks then all of a sudden started having problems), either a boost cut or a fuel cut or something (as it completly clears when you reset the ecu) Any more ideas??im starting to get desperate

Right, finally i have some good news , i took the car for a drive last nite and came home as soon as it was going bung, so i came home turned the car off and unplugged the oxygen sensor,went for a drive and the problem was completly fixed,was driving around for over an 1hr 1/2 trying to get it to fault, but it ran awsome, so the problem turns out to be the oxygen sensor, i will put a new one in next week and let you know if it does actually fix the problem

Cheers for all the help people

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
    • Stock bypass valves are good for plenty of boost.
    • Check for fuel flow out of the outlet end of the rail. Check for spark. Try to start with aerostart (or pressure can brake cleaner or similar solvent in a car) prayed in through TB. If you have fuel and you have spark and it will fire on substitute fuel, then seriously suspect that E85 sitting for ages in your fuel system has destroyed something and put it in your injectors.
    • Nissan stock oil pressure is typically about 1 bar at 1000 rpm plus about 1 bar per thousand revs on top.
    • Luckily for safety applications, with dedicated links not being used for any other traffic, you simply run ProfiSafe (or an equivalent safety comms protocol from other vendors) over the top of ProfiNet (if that's what you're using, or Ethernet IP if you're stuck in the world of American PLCs and not verking vis ze Chermans) and the redundancy is more about being able to know that you need to cause a system diagnostic lockout because you've lost one of your comms channels, rather than not knowing that you've lost your only comms channel. Granted, heartbeats and all that are possible and useable and all that, but some safety applications are are so time critical that you might not be able to afford a few milliseconds until the next check.
×
×
  • Create New...