Jump to content
SAU Community

Recommended Posts

well how much is different? -

different body kit

different rims

engine mods?

exhaust mods?

interior changes don't matter.

if you really wanted one, it wouldn't be any different than bringing in a modded R34, just gotta find standard parts. Actually come to think of it, i don't think the kit may matter too much... as long as it's not too low, spoiler too high, etc...... hmmm...

TK R34 has non standard suspension parts (not just the strut), engine parts (boltons, but still), seats (big ADR no no), underbody diffusers etc.

I think the first reply says it all. Too much hassle. I don't forsee any compliancer who knows what a TK R34 GTt is to agree readily.

  • 3 weeks later...

Are they the only modifications to TK R34 GTTs?

My mate just bought one today (picks up tomorrow) and I've been trying to find info about the TK versions with no luck.

Pics of it are here http://ucn.dealernet.com.au/photo.php?ucni...515F063F3A58B2F

Edited by MattyP
a few of em came in under the old CPA import scheme... I remember back in 2002 or something HPI had a writeup on a black TK R34 GTt.

I almost bought a R34 GTT TK edition! but it was $42K!!! So i just got a 33 GTSt back in the early 'noughties'

Except from the bodykit and built in SatNav kit, i wasnt aware of any other mechanical differences... But, my point is that the importer was able to comply them!

  • 1 month later...
  • 2 weeks later...

of course you can dude! here is what you do:

Give me your money - i'll buy it and drive it here in japan for the year it takes to be able to import it under the personal import scheme and then i'll stick it on a boat and it's all yours! no compliance costs and you get my personal guarantee that i won't drift it or take it to track days or gymkahnas! :(:P

As long as the engine modifications aren't severe then yes it can be done. We have imported several modified R33's and R34's because we have access to stock parts which can be swapped for the pits and compliancing and then swapped back afterwards. Car's with bodykits (not over the top of course), interior mods etc. will pass compliancing and the pits. We sent a R33 with a FMIC fitted over the pits a while back and passed no worries. If you would like me to go into more detail or have any questions just ask.

Cheers,

hey,

I saw a black one with a tommi kit and other associated tommi stuff all over it for sale at phantom motorsports in brisbane not long ago, i recall seing an odd build plate in the engine bay, but I only looked briefly so I can't be sure, might've been something else

mark.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it's magnetic what is stopping you from using a magnet on a thin wire from fishing it out?
    • Those 2 solenoids in that assembly I mention, are the PWM solenoids for torque converter lock-up clutch & EPC (line pressure control) ~ when most folks hear of 'solenoid failure', the tendency is to think electrical failure...but fact of the matter is, especially wrt the EPC solenoid (which is moving/running all the time), you can have an electrically 'good' solenoid, that's absolutely broken/worn out mechanically inside...ie; valve plunger return spring rubbing against spring retainer plate, lowering preload pressure.. ...and the solenoid armature extension limit spring wafer with bad wear/broken off petals... ...and if there's ever been any metal flying about, damage to the valve plunger end itself... ...the stuff one never really sees, unless you go the whole 10yards trying to answer the question "why is my line pressure screwy, but TCU isn't flagging any EPC solenoid fault?"...and carefully dissect the solenoid. Worst (and most probable) scenario is when the plate spring petals break off, they get held by the magnetic flux, get mashed up by the armature into little bits, which end up in the space between the armature & shading core bore, and things get stuck or randomly jam up, and your line pressure goes flat and doesn't change...and the TCU never sees it, as it doesn't actively monitor LP... ..then it gets into insidious land, if you end up with lower than expected line pressure...lets say high clutch..and the lower pressure causes it to slip ~ when I say 'slip', think say 2000rpm on the drive plates, and 1800rpm on the driven plates, because the slip is making them under-rotate by 200rpm ; you get all the usual nasties like heat and band/clutch wear, but even if it's only 20rpm slip the same thing happens...and... you'll hardly ever pick this up driving the thing with the torque converter active as it effectively masks these sorts of slippages that are line pressure related ...(the newer TCUs can detect clutch slip rate)...just  FYI as it were...  
    • There's nothing that some paddle pop sticks and extra cable ties can't fix.
    • Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
    • F my life. I was changing the oil on my R32 GTR today as usual and ran into a bit of a snag. I drained the oil out and was getting ready to finish the job by tightening the drain plug, however The stupid magnetic oil drain plug snapped in half, right at the magnet part. After about an hour of trying to remove it, I used a drill bit, which unfortunately pushed the magnet all the way into the pan, and just leaving the hollow threaded part of the bolt remaining. I was able to remove the hollow portion of the bolt from the oil pan with some pliers but the magnet is still in there.  So, the question is, should I drop the oil pan to get the magnet piece out, or is it okay to leave it in there? I really dont want to drop the pan, i'm about to go nuts.  PSA: Do NOT buy a BLOX magnetic drain plug. This is the one i had.    https://bloxracing.com/products/magnetic-oil-drain-plug-m12x1-25mm?variant=37131252859052&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gclid=CjwKCAjw47i_BhBTEiwAaJfPpgti1D2JwO7TDuMpXuqeQPCuIQSAfwxpWQH5rF9MD7sm5SCZDWLR_RoC_YoQAvD_BwE    
×
×
  • Create New...