Jump to content
SAU Community

New Kkr Graphs

benhpi

By benhpi,
in Engines & Forced Induction

 Share

Recommended Posts

benhpi Enthusiast

benhpi

Posted
Posted

A bit of an update for those who are interested in the KKR480 and how it works on an RB25.

The graphs below are for an internally stock R33 (normal head gasket too) with 550cc injectors, pump, Power FC, FMIC and 3-inch exhaust with an aftermarket cat. The owner fitted the turbo himself with a KKR dump pipe. The car was tuned by CRD and a week later ran on the Mainline dyno at the Auto Salon. As you can see the results are very consistent and this is the sort of power most people are getting, with around 19psi boost.

post-5573-1146272523.jpg

Link to comment
https://www.sau.com.au/forums/topic/115395-new-kkr-graphs/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted
' date='30 Apr 2006, 11:41 PM' post='2127816']

it aint as cheap as the 699 add makes it out to be.

i do believe, by the time the "special" dump is purchased and installed your looking at approx $1300-$1500

When a GCG hi-flow is around $500 more (bolt on) and far more responsive

The choice is simple

Link to comment
https://www.sau.com.au/forums/topic/115395-new-kkr-graphs/#findComment-2128033
Share on other sites
osiris23 Rising Star

osiris23

Posted
Posted

yer i want to know about the 430 as well. i emailed the people but they just spat shit at me about it i dont belive.

asked if this turbo would be suited to my car and if it bolts straight on and not have as much hassle as the 480 installing. Reply;

yes ~ This is a great choose for ur CAR,,,, u will love it~ Just need a bit Mods for Dump pipe ,,,, the Manifold Flange will just Bolt on ,,,, 248 KW at wheel @ 1.1 Bar on R33 GTST with Factory ECU, Intercooler ~~~~~THANKS~~~~~`

Kind Regards

Automotorsports

H.P.A. - Hyper Performance Automotorsports

Link to comment
https://www.sau.com.au/forums/topic/115395-new-kkr-graphs/#findComment-2130392
Share on other sites
benhpi Enthusiast

benhpi

Posted
  • Author
Posted
yer i want to know about the 430 as well. i emailed the people but they just spat shit at me about it i dont belive.

asked if this turbo would be suited to my car and if it bolts straight on and not have as much hassle as the 480 installing. Reply;

yes ~ This is a great choose for ur CAR,,,, u will love it~ Just need a bit Mods for Dump pipe ,,,, the Manifold Flange will just Bolt on ,,,, 248 KW at wheel @ 1.1 Bar on R33 GTST with Factory ECU, Intercooler ~~~~~THANKS~~~~~`

Kind Regards

Automotorsports

H.P.A. - Hyper Performance Automotorsports

Mate, I don't know who you emailed but Otomoto is the distributor of KKR and we certainly didn't give you that reply. The best result we have seen so far on an RB20 from a KKR430 is just under 200kW at the wheels. On an RB25 we've seen close to 230kW at the wheels. If anyone has done better we'd like to hear about it.

Link to comment
https://www.sau.com.au/forums/topic/115395-new-kkr-graphs/#findComment-2131256
Share on other sites
JaFF Proficient

JaFF

Posted
Posted (edited)

Benhpi, Do you have the graph of the 230rwkw run for the RB25 with the 430?

I'm interested in getting a turbo that give me around that mark of power so that I don't have to go spending big bucks on injectors AFMs full engine management (i have SAFC II).

The other option I've been looking at is a HKS 2530 and they seem to be getting people into the 12.5sec 1/4 region with about 230-240rwkw.

Edited by JaFF
Link to comment
https://www.sau.com.au/forums/topic/115395-new-kkr-graphs/#findComment-2131475
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Hey guys so turns out this project is going to be much bigger than I thought haha but I've done some my homework and have done a few panels on my car, but one part I can just not visualise is this. If I do a spot repair and I put filler in a dent for example and sand outside of the repair with 320 grit lets say so the primer can stick as I will only put primer on that repair and the surrounding area and then repaint the whole panel. Don't I need to make sure that I don't put primer on the old clear coat? I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down, it's still shiny. I thought putting paint on clearcoat or primer on clearcoat is a bad idea because it won't stick. So in this scenario it's a bit different to mine but imagine someone doing a spot repair and only painting that small section of repair but the new paint is landing on the old clearcoat. What am I missing?
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      I was immediately reminded that your location is QLD. Sounds like a perfect SEQ business idea.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      And if you can't drive bigger injectors with peak and hold as low impedance injectors during low pulse width, it's even harder to get a nice clean known amount of fuel.
    • MBS206
      Upgrade an rb25neo

      By MBS206 · Posted

      From watching the 6 hour, it seems they've really got the class A2 Ford Mustang sorted, as it was cutting it up in lap times with he X1 cars, which are all those late model turbo BMWs. I have no real idea about either of them, but watching what was happening at the 6Hour, it made the Mustang which is meant to be in a slower class look very impressive.
    • MBS206
      NC MX5

      By MBS206 · Posted

      Also Mark, perfect timing for you to offer Fab9 to open an Aus branch for them, where you'll setup all the contracts that basically you're just the paperman, everything goes through Aus for their gear, and you can buy a piece of paper off of them once every 3 months that's really expensive. Tariffs aren't paid on exports after all. And for it, you'll just take 10% cut for your name on the papers. Oh, and a free NC intake setup and air box...
×
×
  • Create New...