Jump to content
SAU Community

Recommended Posts

Hey guys.

Hey RB30-POWER, where did you get the instructions for the resetting of the idle on the RB25DET? I only ask cause it was my DIY posted up on here to invloving my idle reset from when i cleaned my AAC valve.

I can't remember 100%, but i'm pretty sure I got my method from the nissan engine service manual.

I might have got it around the wrong way like you've posted and its the TPS sensor that needs to be removed while adjusting the idle through the idle adjustment screw, and not the AAC valve as is the method for the RB20det.

Either way, it seems to work i spose, as it is the AAC assembly that allows more air in for idle if it thinks the car needs it, and by disconnecting this plug while adjusting the base setting then re-attaching the connection and looking for any differences in idle speed before fine tuning if need be (though i still haven't heard of any skylines requiring this step).

The best reason I can think of for disconnecting the TPS from the RB25 while adjusting the idle screw, is so that the value coming from the TPS is absolutely nothing, so even if the car thinks it has to compensate for a TPS setting or that the Throttle is even partly open, it won't affect the setting of the idle.

Or I may be completely wrong.

Edited by insu

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
×
×
  • Create New...