Jump to content
SAU Community

Recommended Posts

:D for the street/old pac drivers. and for the track.

due to a couple of friends of mine loosing there engines from a simple lack of oil i thought id post up a easy guide on how to keep your engine from poping...

GTR OWNERS: when you change your oil, fill the carnt thing up to the hump on the dipstick.

this works out to be roughly 6 to 6.5 litres of oil.

if the oil level is on high. it will surge just acelerating in first gear. (not to mention corners)

i have done thorough testing of this and can asure you all that this quantity of oil is the MINIMUM that is required to combat oil surge in a standard sumped gtr.also a tomie baffeld one to.(makes no differance if its

baffeled or not.) (mechanical oil presure guages dont lie)

now. im not a fan of motul oils. but hey you guys love the shiet so yeah.

using a good quality synthetic oil with a cold rating of less than 15. and a hot rating of 50 or more is the go.

eg 5w60 penrite is my personal favorite. its the only one i have used that can stand up to a whole track day without "breaking down"

GTS-T OWNERS your cars have a much better sump design so you can get away with using abit less oil. 5.5-6 litres of oil is suficant. the rwd sumps still have poor bafeling anyway. so fill them to just before the hump on the dipstick.

so summing it up PUT OIL IN YOUR ENGINE its not hard to fill er up abit over full. it does no damage to the engine. it just keeps all those legs in bed.

so following this instruction it will extend the life or your RB by a long mark

the same rules aply to any RB powerd car with the standard CAPACITY sump

ps.. moderator please leave in nsw section as it is aimed at our own circle. cheeres :D

Link to comment
https://www.sau.com.au/forums/topic/115490-keeping-that-engine-alive/
Share on other sites

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

But you don't recomment this for the street do you?

I changed my oil recently and as I had a track day coming in a few weeks I overfilled. Car goes fine, a bit more oil in the catch can (or spewing out of it in my case since it is a crap can) but the one thing I noticed is that when I start it up in the morning (or stone cold anyway) it burns oil for about 3-5 minutes. I can see it coming out the exhaust and my garage fills with fumes.

It didn't do this before. Can you explain it and is it ok?

yes. the same aplies

Mine has a oil controll problem at the moment... we built this RB30DET over 2.5 years ago and we did not know to block one of the oil feeds and put a restrictor so if i had more oil in the engine i would have an oil fountain lol

getting this done in the next month or so

i think you may have wire crossed steve-o. surge tank is used to combat fuel surge. there is no realy way to add an external surge tank for oil without going dry sump, in which case it's still not realyl a surge tank, just an oil, holding tank.

generally sump baffles are the way to go to help combat oil surge as they attempt to prevent oil from flowing away from the pick-up, or even better a larger sump and baffles, or at the extreme, dry sump. the only reason not everyone has them is fitting the sump baffles requires engine removal.

Yeah i thought that just after i posted it up - couldnt be bothered deleting it

Thanks richo - so far no fuel issues (touch wood) other than that damn fuel cap - it started leaking again today !!! but its only on very hard cornering

Mine has a oil controll problem at the moment... we built this RB30DET over 2.5 years ago and we did not know to block one of the oil feeds and put a restrictor so if i had more oil in the engine i would have an oil fountain lol

getting this done in the next month or so

you wont get any more oil up there than normal. instead you will be pumping oil thru the motor not air!!

this is what people dont understand...

but if you wanna pull the head off to try and kinda make a diferance go rite ahead :(

Turbine and I just pulled my GTS4 RB20DET out this weekend and found that 4& 6 BigEnds were totaly cooked and stuffed from lack of oil.

Have had clattering noise for some time now and oil gauge always mostly reads very low but sometimes full scale so just dismissed the oil gauge sender as faulty which is common fault have been told.

Mostly filled to under high level so prob not enough for AWD GTS4 which has same sump as GTR & Stagea.

Over filling probably may not have saved my RB20 but it may have made it last longer so I will be filling my next motor up higher.

I am looking for a Stagea RB25DET if anyone knows of a near complete motor less Gbox.

Well if GTR's suffered from oil surge... this thread would actually be right

But they dont, the sump design is actually quite good.

The killing of bearings etc is due to other reasons, certainly not oil surge

A topic comes to mid actually... i love the search button :O

http://www.skylinesaustralia.com/forums/in...opic=110680&hl=

What oil is best for a 33gtst with only a turbo-back, front mount, pod and boost controller?

Try doing a search - there's a million threads on this (particularly in General Maintenance and Forced Induction)

For the record, I use Elf Excellium 5W-40 Full Synthetic

In saying that, I think a fair few people on here use Motul 300V Chrono, 8100 Excess or 4100 Turbolight - there's many to choose from that will do the job. Do the search and figure out what suits you best.

I guess it comes down to how much you want to pay, how modded your car is and how you use your car (i.e sunday driver, daily commuter or weekend warrior for example).

Update on an oil problem no-one could have fixed!

Found the reason for my oil problems - the back plate on the oil pump had come virtually off and most of the screws had come out!!

As this is inside the AWD sump and needed the complete block top be removed to identify the problem.

HOT DAMN!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have copied the images in the original post from photobucket to the SAU servers to make sure they stay available.
    • Mate you saved be from dying in the Perth summer. AC wasn't changing direction and just going into diagnostics mode fixed it. You're a legend and I would shout you a beer if I could!
    • Unfortunately effort gone to waste, you will have substantial issues with how the manifold and wastegate have been integrated. You would be so much better off with a modified stock manifold like this: https://hypergearturbos.com/product/rb25detexgatedmanifold/   OR literally just getting a off the shelf Sinco or 6Boost manifold as myself and others have mentioned.  
    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
×
×
  • Create New...