Jump to content
SAU Community

Recommended Posts

Anybody know of any threads anywhere that could help me in tuning my E-manage and setting up the Profec E-01?

Very nice wanky looking and expensive etc,,but going on searches it appears as though not many people have this set up,,

any help would be greatly appreciated,,

cheers

John

Link to comment
https://www.sau.com.au/forums/topic/115492-profec-e-01/
Share on other sites

G'day Chris,,

I can't seem to get the profec to acheive any boost greater than the waste gate spring setting of 6 Psi,,

I am unsure of base settings ,,

for reference,, running a super T70, with external 40mm gate,,

cheers

John

Link to comment
https://www.sau.com.au/forums/topic/115492-profec-e-01/#findComment-2126756
Share on other sites

i am running standard turbo etc so my set up may be different

what sort of psi ar eyou looking at running?? are you using the external signal harness??

i would start by using the manual boost mode.

start boost psi at 5.5 then if you are after reallly high boost start at 7.2

set at 15

gain at 25.

see what boost it goes to then adjust accordingly try to not set gain at over double the set.

Link to comment
https://www.sau.com.au/forums/topic/115492-profec-e-01/#findComment-2126783
Share on other sites

Kool, thanks, I'll have a play later,,

I would hope to have high boost up to around 16 Psi, and maybe 20 for the overtake button,,and stay with the 6 pound for low,

I do have the external signal harness, pretty much got all the extras for it except temp sensors etc,,,

cheers

John

Link to comment
https://www.sau.com.au/forums/topic/115492-profec-e-01/#findComment-2126801
Share on other sites

i am using emanage ultimate. All in all its a good computer i am happy with it. I am only using it because i have an auto and thats all that i could use to tune both fuel and ign. Power fc doesn't work with auto. with blitz fmic, full exhaust, ebc running at 11 psi i am getting 198.7rwkw.

Link to comment
https://www.sau.com.au/forums/topic/115492-profec-e-01/#findComment-2126939
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...