Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

Tail gaters on the freeway in the morning. When they do, I slow down, they try and overtake me I drop back a gear and boot it, then they get back in behind me and if they keep gating me I keep doing it lol. I hate guys who always stare at p platers cars when you drive past coz they think your a hot chick or something haha im a dude!

What REALLY grinds my gears is having to fix peoples shithouse drawings that were drawn in AutoCAD and having to fix problems in microstation drawings when the system isn't setup properly and your supposed microstation "administrator" readily admits he knows nothing about the Structural package you are trying to use, yet he sets the system up with so many limitations that YOU CAN'T ACTUALLY DO WHAT YOU NEED TO DO! FFS I'M READY TO BREAK SOMETHING/SOMEONE

I feel your pain, trainee draftsperson here but I do my job right haha.

Edited by Dani Boi
  • 2 weeks later...

wgmg modern pop singers i dont care how good you think you are stop writing songs about it damnit you are not fergilicious nor glamorous your just bloody anoying

and if you want to be my girlfriend get some singing lessons and some fasion sense oh and a clue

Ive got a few. . .

people that have no common sense AT ALL and get frustrated and pissed off when they cant figure the most simple thing.

people that sit under the speed limit

idiots that try and drag you in crappy VL commodores GOD DAM I HATE VLs

or any other commodore of falcon

things that go wrong one after the other (you fix one problem then a day of two later something else stuffs up) and it keeps happening to different things

sony explode gear

PEOPLE THAT TELL ME TO GET A HOLDEN OR A FORD. . . IVE HAD BOTH AND WILL NEVER GET ONE AGAIN

people that tell me to get a V8. . . . . if i wanted a V8 i would have got one (every time i hear that i hate V8s that little bit more)

TRAFFIC COPS THAT DONT KNOW SHIT ABOUT CARS. . . F**K OFF !!!! (when i had my VT i took off the engine cover and polished the top of the inlet manifold. . . the cops didnt know what it was. . . GRRRRRR!!!!!

and people that dont respect other peoples things. . . i didnt buy that so you could f**k it up!!!!

that does feel better. . haha

  • 2 weeks later...

WGMG is the crappy food that gets given to you on planes. They tryed serving me this crap called mushroom egg cake. . . It smelt so bad

GET REAL FOOD !!!

Also the cost of plane tickets from karatha to perth $535 return, quantas really rip you off as there isnt any competition from other airlines

:)

Tools that almost reward me with a new front bar by cutting from the right hand turning lane straight into the left lane without indicating or obviously checking to see if there was anyone there ;) If I couldn't see it happening so clearly I could have taken a hit, but as much as I need & want a new front bar I'm not having my car off the road because of it.




  • Similar Content

  • Latest Posts

    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
×
×
  • Create New...